2011 Ford Fiesta Ford DPS6 PowerShift TCM Clone
DPS6 first-year PowerShift, TCM fault. Bench-program by mail at our Arlington, TX workshop — $$250 flat, typical 24-hour turnaround, flat-rate return shipping at checkout.
2011 Ford Fiesta — what this service covers
We clone and program the Ford DPS6 PowerShift transmission control module (TCM / TCU) on the bench. The DPS6 is Ford's 6-speed dry dual-clutch automated transmission fitted to the 2011-2018 Focus and 2011-2019 Fiesta, and its TCM commands the clutches and shift-fork actuators — the reason these cars are known for shudder and clutch-adaptation trouble. Two paths, $250 flat: CLONE — we copy your original TCM's VIN, calibration, and stored clutch adaptation onto a donor TCM so the replacement is effectively plug-and-play; USED-TCM PROGRAMMING — a second-hand or new TCM is programmed to your car when the original is dead. This is module DATA transfer and programming, not a mechanical repair: it does NOT cure a worn clutch or a failed shift-fork actuator (those are mechanical repairs), the donor must match the part number, and a clutch relearn / adaptation is performed at the car after install. A technician verifies the part number by VIN and module label before you ship anything.
Chassis context
DPS6 first-year PowerShift, TCM fault. Ford DPS6 PowerShift TCM Clone on this chassis is a routine bench job — we've handled this exact year/model many times.
What you get
- Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
- Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
- Donor part-number compatibility verified by VIN and module label before you ship
- Bench read + verify of both units before anything is written
- Bench communication test on a stable, regulated power supply before return
- Clear install notes — including the clutch relearn / adaptation to complete at the car
Common 2011 Ford Fiesta symptoms this fixes
- ✓Dead or no-communication DPS6 TCM and a dealer replacement quote you don't like
- ✓"Transmission Fault Service Now" warning traced to the control module, not the clutch
- ✓Used TCM installed and the car throws gear-selection or engagement faults (VIN / calibration mismatch)
- ✓Water-, heat-, or corrosion-damaged TCM that still responds — clone it out before it fails completely
- ✓Junkyard or new TCM that needs your VIN, calibration, and clutch adaptation put on it
- ✓You want the module ready to install before it goes into the car
How it works
1. Pay online
Secure online checkout, $250. Shipping address arrives by email.
2. Ship module
USPS to PO Box 120241, Arlington TX 76012 if you ship USPS — or 1009 Oakwood Ln # 120241, Arlington TX 76012 if you ship UPS or FedEx (UPS and FedEx cannot deliver to a PO Box).
3. Get it back
Typical 24-hour bench turnaround, return speed your choice at checkout.
2011 Ford Fiesta FAQ
Vehicle-specific answers.
Does AML handle 2011 Ford Fiesta ford dps6 powershift tcm clone?
How much does 2011 Ford Fiesta ford dps6 powershift tcm clone cost?
What's the turnaround time?
What do I need to ship for a 2011 Ford Fiesta job?
Will this work if my 2011 Ford Fiesta has had a failed coding attempt before?
How do I confirm fitment before shipping?
Other vehicles we serve for Ford DPS6 PowerShift TCM Clone
Ready to ship your 2011 Ford Fiesta's module?
Pay online, get the shipping address by email, send the module, get it back within a week.