Auto Module Lab logoAUTO MODULELAB
COLORADO · MAIL-IN SERVICE

Porsche DME / Engine ECU Clone in Colorado

Ship your module from Denver or anywhere in Colorado — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from CO
Text Before You Buy

Why Colorado customers mail in porsche dme / engine ecu clone

Colorado has roughly 5.3 million registered vehicles, and trucks & 4x4 SUVs make up much of what Denver-area shops and owners mail us. European platforms cluster in Denver, Colorado Springs, Aurora, and most local Denver shops sub bench jobs like porsche dme / engine ecu clone to a specialist instead of tooling up for one car. Regional west — about 2 days each way.

Metros we serve in Colorado

DenverColorado SpringsAuroraFort Collins

Colorado at a glance

  • ~5.3M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Colorado requires emissions testing in the Denver-Boulder Front Range metro region; rural counties are exempt.

What you get

  • Your original DME's identity, immobilizer relationship, and calibration cloned onto the donor, where the original reads
  • Donor Bosch and Porsche part-number compatibility verified by VIN and ECU label before you ship
  • Bench read plus verification of both units before anything is written
  • Checksum and write verification on the donor after the clone
  • An honest call before any charge if the original will not read and the job is not a clone
  • Bench communication test on a stable, regulated power supply before return
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Colorado ↔ Arlington TX

USPS Priority runs northwest from the North Texas network; roughly 2 days. Typical round-trip from Denver or anywhere in Colorado:

  1. Day 0

    You ship

    USPS Priority from CO, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Colorado FAQ

Common questions from customers shipping from Colorado.

How long does shipping take from Colorado to your Arlington TX workshop?
USPS Priority Mail from Denver, CO reaches our Arlington workshop in about 2 business days. USPS Priority runs northwest from the North Texas network; roughly 2 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Colorado?
USPS Priority flat-rate from Colorado to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Colorado is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Regional west — about 2 days each way.
Do you accept porsche dme / engine ecu clone modules from Colorado?
Yes — we receive modules from Denver, Colorado Springs, Aurora, Fort Collins and the rest of Colorado regularly. With about 5.3 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Colorado.
Is there a porsche dme / engine ecu clone shop in Denver I should use instead?
Most Denver shops don't keep the bench equipment for porsche dme / engine ecu clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Regional west — about 2 days each way.
Does Colorado vehicle inspection or emissions testing affect this service?
Colorado requires emissions testing in the Denver-Boulder Front Range metro region; rural counties are exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Colorado and federal requirements.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both DME part numbers, you ship the units to Auto Module Lab in Arlington, TX — this is a mail-in bench service, we do not come to the car. We clone on the bench, verify the write, test communication, and ship both units back with tracking. Return shipping is your choice at checkout: Standard $29.95, UPS 2-Day $54.95, or UPS overnight $94.95.
Which Porsches does this cover?
The advertised coverage is the Bosch ME7.8 DME on the 996-generation 911 and the 986 Boxster, roughly 1998-2004, and the Bosch ME7.1.1 on the 955 / 9PA Cayenne, roughly 2003-2006. Related Bosch ME7 units on early 987 Boxster and Cayman are supported where the hardware matches. 996 Turbo and GT variants, late 9PA facelift cars, and 997-and-newer 911s are verified case by case — send the VIN and DME label photo and we give you a straight answer before you order.

Full details

See the complete Porsche DME / Engine ECU Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Colorado today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Denver: about a week.

(817) 678-3252