Auto Module Lab logoAUTO MODULELAB
OREGON · MAIL-IN SERVICE

Ford / Lincoln BCM / SJB Clone in Oregon

Ship your module from Portland or anywhere in Oregon — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from OR
Text Before You Buy

Why Oregon customers mail in ford / lincoln bcm / sjb clone

Oregon has roughly 3.4 million registered vehicles, and trucks, SUVs & imports make up much of what Portland-area shops and owners mail us. Domestic work like ford / lincoln bcm / sjb clone runs high-volume across Oregon — we see a steady stream out of Portland, Salem, Eugene. Cross-country northwest — about 3 days each way.

Metros we serve in Oregon

PortlandSalemEugeneGresham

Oregon at a glance

  • ~3.4M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Oregon requires DEQ emissions testing in the Portland and Medford metro areas; the rest of the state is exempt.

What you get

  • Your original SJB/BCM's VIN, configuration, and coding cloned onto the hardware-matched donor you supply
  • Donor part-number compatibility verified by VIN and module label BEFORE you ship or buy
  • A straight answer up front on which of the three outcomes yours is — full clone, clone plus on-car PATS finish, or unreadable
  • Bench read and verify of both modules before anything is written to the donor
  • Bench communication test on a regulated power supply so the donor leaves us talking
  • Clear written install notes, including whether a PATS parameter reset or key relearn applies at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Oregon ↔ Arlington TX

USPS Priority routes far northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Portland or anywhere in Oregon:

  1. Day 0

    You ship

    USPS Priority from OR, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Oregon FAQ

Common questions from customers shipping from Oregon.

How long does shipping take from Oregon to your Arlington TX workshop?
USPS Priority Mail from Portland, OR reaches our Arlington workshop in about 3 business days. USPS Priority routes far northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Oregon?
USPS Priority flat-rate from Oregon to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Oregon is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept ford / lincoln bcm / sjb clone modules from Oregon?
Yes — we receive modules from Portland, Salem, Eugene, Gresham and the rest of Oregon regularly. With about 3.4 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Oregon.
Is there a ford / lincoln bcm / sjb clone shop in Portland I should use instead?
Most Portland shops don't keep the bench equipment for ford / lincoln bcm / sjb clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Oregon vehicle inspection or emissions testing affect this service?
Oregon requires DEQ emissions testing in the Portland and Medford metro areas; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Oregon and federal requirements.
How is this different from your Ford BCM programmed-to-VIN service?
Opposite models, on purpose. This service is the clone path at $250: you send your original plus a donor and we transfer your data on the bench. Our Ford BCM programmed to your VIN service is supply-a-part at $349: you send nothing, we source the correct module and program it to your VIN before it ships. Cloning is cheaper and preserves your exact as-built data; supply-a-part is the answer when your original is destroyed or missing, or when you would rather not source a donor.
How do I pick a compatible donor module?
Match the Ford part number on your original's label as closely as you can. A same-year, same-model vehicle is not automatically a match — trim, option content and running production changes all move the part number. Send us your label photo and the donor listing BEFORE you buy and a technician confirms the pair at no charge. An unverified donor is the most common reason one of these jobs stalls.

Full details

See the complete Ford / Lincoln BCM / SJB Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Oregon today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Portland: about a week.

(817) 678-3252