Auto Module Lab logoAUTO MODULELAB
UTAH · MAIL-IN SERVICE

Ford / Lincoln BCM / SJB Clone in Utah

Ship your module from Salt Lake City or anywhere in Utah — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from UT
Text Before You Buy

Why Utah customers mail in ford / lincoln bcm / sjb clone

Utah has roughly 2.7 million registered vehicles, and trucks & 4x4 SUVs make up much of what Salt Lake City-area shops and owners mail us. Domestic work like ford / lincoln bcm / sjb clone runs high-volume across Utah — we see a steady stream out of Salt Lake City, West Valley City, Provo. Cross-country northwest — about 2-3 days each way.

Metros we serve in Utah

Salt Lake CityWest Valley CityProvoOgden

Utah at a glance

  • ~2.7M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt.

What you get

  • Your original SJB/BCM's VIN, configuration, and coding cloned onto the hardware-matched donor you supply
  • Donor part-number compatibility verified by VIN and module label BEFORE you ship or buy
  • A straight answer up front on which of the three outcomes yours is — full clone, clone plus on-car PATS finish, or unreadable
  • Bench read and verify of both modules before anything is written to the donor
  • Bench communication test on a regulated power supply so the donor leaves us talking
  • Clear written install notes, including whether a PATS parameter reset or key relearn applies at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Utah ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Salt Lake City or anywhere in Utah:

  1. Day 0

    You ship

    USPS Priority from UT, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Utah FAQ

Common questions from customers shipping from Utah.

How long does shipping take from Utah to your Arlington TX workshop?
USPS Priority Mail from Salt Lake City, UT reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Utah?
USPS Priority flat-rate from Utah to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Utah is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 2-3 days each way.
Do you accept ford / lincoln bcm / sjb clone modules from Utah?
Yes — we receive modules from Salt Lake City, West Valley City, Provo, Ogden and the rest of Utah regularly. With about 2.7 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Utah.
Is there a ford / lincoln bcm / sjb clone shop in Salt Lake City I should use instead?
Most Salt Lake City shops don't keep the bench equipment for ford / lincoln bcm / sjb clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 2-3 days each way.
Does Utah vehicle inspection or emissions testing affect this service?
Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Utah and federal requirements.
Why won't a used SJB work if I just plug it in?
Because the SJB stores your VIN, your as-built configuration, and PATS-related anti-theft data. A donor arrives married to another vehicle, so the network sees a VIN mismatch: you typically get a flashing theft light, a crank-no-start, or a set of unrelated electrical faults from wrong configuration. Cloning writes your VIN, configuration and coding onto the donor so it behaves as your original did — without a dealer IDS/FDRS session.
Will my keys still work after the clone?
On applications where a full PATS data transfer is supported, yes — your existing keys keep working with no extra steps. On some applications the module still needs an on-car PATS parameter reset or key relearn after installation, which a locksmith or a Ford dealer performs, and on several models there is a self-initialization procedure using two working keys. We tell you which case yours is before you ship, so there are no surprises in your driveway.

Full details

See the complete Ford / Lincoln BCM / SJB Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Utah today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Salt Lake City: about a week.

(817) 678-3252