Auto Module Lab logoAUTO MODULELAB
UTAH · MAIL-IN SERVICE

GM ECM/PCM Cloning (E-Series) in Utah

Ship your module from Salt Lake City or anywhere in Utah — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from UT
Text Before You Buy

Why Utah customers mail in gm ecm/pcm cloning (e-series)

Utah has roughly 2.7 million registered vehicles, and trucks & 4x4 SUVs make up much of what Salt Lake City-area shops and owners mail us. Domestic work like gm ecm/pcm cloning (e-series) runs high-volume across Utah — we see a steady stream out of Salt Lake City, West Valley City, Provo. Cross-country northwest — about 2-3 days each way.

Metros we serve in Utah

Salt Lake CityWest Valley CityProvoOgden

Utah at a glance

  • ~2.7M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt.

What you get

  • Your original ECM/PCM data cloned onto the matching donor — VIN, calibration, and anti-theft relationship carried over, where supported
  • A replacement that is plug-and-play at the car, with no dealer SPS programming trip
  • Bench read + verify of your original before anything is written to the donor
  • Donor part-number / family match confirmed against your original
  • Clone written on the bench with a stable, regulated power supply
  • Bench communication tested on the donor before it ships back
  • Both modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Utah ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Salt Lake City or anywhere in Utah:

  1. Day 0

    You ship

    USPS Priority from UT, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Utah FAQ

Common questions from customers shipping from Utah.

How long does shipping take from Utah to your Arlington TX workshop?
USPS Priority Mail from Salt Lake City, UT reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Utah?
USPS Priority flat-rate from Utah to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Utah is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 2-3 days each way.
Do you accept gm ecm/pcm cloning (e-series) modules from Utah?
Yes — we receive modules from Salt Lake City, West Valley City, Provo, Ogden and the rest of Utah regularly. With about 2.7 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Utah.
Is there a gm ecm/pcm cloning (e-series) shop in Salt Lake City I should use instead?
Most Salt Lake City shops don't keep the bench equipment for gm ecm/pcm cloning (e-series) — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 2-3 days each way.
Does Utah vehicle inspection or emissions testing affect this service?
Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Utah and federal requirements.
Can you clone a 2019 or newer GM (Global B)?
No. Global B controllers (roughly 2019 and newer) are not bench-cloneable and are excluded from this service. We verify your controller by VIN first — if yours is Global B, we tell you up front before you ship anything rather than after you pay.
Do I have to send a donor module too?
Yes. Cloning copies your original module's data onto a second physical unit, so you send both: your original (which holds your VIN, tune, and anti-theft data) and a matching donor of the same controller family and part number. If your original is completely dead and unreadable, there is nothing to copy — cloning isn't possible in that case.

Full details

See the complete GM ECM/PCM Cloning (E-Series) service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Utah today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Salt Lake City: about a week.

(817) 678-3252