Auto Module Lab logoAUTO MODULELAB
TEXAS · MAIL-IN SERVICE

GM ECM / PCM — Programmed & Ready to Install in Texas

Ship your module from Houston or anywhere in Texas — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$399 flat Ships in 1–2 Business Days ~1 day USPS from TX
Text Before You Buy

Why Texas customers mail in gm ecm / pcm — programmed & ready to install

Texas has roughly 22.8 million registered vehicles, and full-size pickups & SUVs make up much of what Houston-area shops and owners mail us. Domestic work like gm ecm / pcm — programmed & ready to install runs high-volume across Texas — we see a steady stream out of Houston, Dallas-Fort Worth, San Antonio. Same-state — fastest possible round-trip.

Metros we serve in Texas

HoustonDallas-Fort WorthSan AntonioAustin

Texas at a glance

  • ~22.8M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Texas requires an annual safety inspection program statewide, with OBD-II emissions testing in 17 metro counties.

What you get

  • The ECM itself — you send nothing in
  • Current factory calibration flashed for YOUR VIN via Techline Connect / SPS2
  • Engine, transmission, axle ratio, and emissions content matched to your build
  • Bench-verified before it ships
  • Written install + security relearn instructions in the box
  • Outbound shipping speed your choice at checkout — standard, 2-day, or overnight
  • 6-month warranty on the module and the programming

Shipping timeline — Texas ↔ Arlington TX

USPS Priority routes through the North Texas distribution network; 1 day from most of the state. Typical round-trip from Houston or anywhere in Texas:

  1. Day 0

    You ship

    USPS Priority from TX, ~$9

  2. Day 1

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    24-hour bench turnaround

  4. ~Day 3

    Back to you

    Return speed you chose at checkout

Texas FAQ

Common questions from customers shipping from Texas.

How long does shipping take from Texas to your Arlington TX workshop?
USPS Priority Mail from Houston, TX reaches our Arlington workshop in about 1 business day. USPS Priority routes through the North Texas distribution network; 1 day from most of the state. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Texas?
USPS Priority flat-rate from Texas to Arlington TX runs about $9. The customer pays shipping to us; return shipping back to Texas is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Same-state — fastest possible round-trip.
Do you accept gm ecm / pcm — programmed & ready to install modules from Texas?
Yes — we receive modules from Houston, Dallas-Fort Worth, San Antonio, Austin and the rest of Texas regularly. With about 22.8 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Texas.
Is there a gm ecm / pcm — programmed & ready to install shop in Houston I should use instead?
Most Houston shops don't keep the bench equipment for gm ecm / pcm — programmed & ready to install — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Same-state — fastest possible round-trip.
Does Texas vehicle inspection or emissions testing affect this service?
Texas requires an annual safety inspection program statewide, with OBD-II emissions testing in 17 metro counties. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Texas and federal requirements.
Will it run correctly right out of the box?
Yes — it is flashed with the current factory calibration built against your VIN, so the engine, transmission, axle ratio and emissions content already match your truck. Install it, run GM's security relearn (three 10-minute key cycles), and drive. A crank-relearn may be advised on some applications; the instructions ship in the box.
Can you load a performance tune instead?
This product ships factory calibration only. If you want a performance calibration afterward it is yours to do — the module is not locked against it. We also sell dedicated bench services such as DOD/AFM delete and speedometer recalibration if that is what you actually need.

Full details

See the complete GM ECM / PCM — Programmed & Ready to Install service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Texas today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Houston: about a week.

(817) 678-3252