TEXAS · MAIL-IN SERVICE

GM Kelsey-Hayes 325 ABS Repair in Texas

Ship your module from Houston or anywhere in Texas — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$325 flat Typical 3-5 Business Day Bench Turnaround ~1 day USPS from TX
Text Before You Buy

Why Texas customers mail in gm kelsey-hayes 325 abs repair

Texas has roughly 22.8 million registered vehicles, and full-size pickups & SUVs make up much of what Houston-area shops and owners mail us. Domestic work like gm kelsey-hayes 325 abs repair runs high-volume across Texas — we see a steady stream out of Houston, Dallas-Fort Worth, San Antonio. Same-state — fastest possible round-trip.

What we see from the South

Southern trucks are spared the salt but not the heat, and sustained underhood temperature is what ages the solder joints in this module. The signature is a fault that appears after the truck has been running and clears after it sits overnight. If that is what you have, say so on the job note — a fault that only exists warm has to be reproduced warm on the bench.

Metros we serve in Texas

HoustonDallas-Fort WorthSan AntonioAustin

Texas at a glance

  • ~22.8M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Texas ended its annual safety inspection for most non-commercial vehicles in 2025; emissions testing still applies in designated metro counties. Confirm current requirements with the Texas DMV.

What you get

  • Your original KH325 EBCM opened, inspected and bench-tested
  • Board-level repair of the relay and driver section and its solder joints
  • Your module returned — no programming or bleeding differences from a swap
  • Outputs and communication verified before it ships back
  • Thermal cycling for intermittent faults that only appear warm
  • An honest assessment first if the board cannot be economically recovered

Shipping timeline — Texas ↔ Arlington TX

USPS Priority routes through the North Texas distribution network; 1 day from most of the state. Typical round-trip from Houston or anywhere in Texas:

  1. Day 0

    You ship

    USPS Priority from TX, ~$9

  2. Day 1

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 3

    Back to you

    Return speed you chose at checkout

Texas FAQ

Common questions from customers shipping from Texas.

How long does shipping take from Texas to your Arlington TX workshop?
USPS Priority Mail from Houston, TX reaches our Arlington workshop in about 1 business day. USPS Priority routes through the North Texas distribution network; 1 day from most of the state. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Texas?
USPS Priority flat-rate from Texas to Arlington TX runs about $9. The customer pays shipping to us; return shipping back to Texas is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Same-state — fastest possible round-trip.
Do you accept gm kelsey-hayes 325 abs repair modules from Texas?
Yes — we receive modules from Houston, Dallas-Fort Worth, San Antonio, Austin and the rest of Texas regularly. With about 22.8 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Texas.
Is there a gm kelsey-hayes 325 abs repair shop in Houston I should use instead?
Most Houston shops don't keep the bench equipment for gm kelsey-hayes 325 abs repair — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Same-state — fastest possible round-trip.
Does Texas vehicle inspection or emissions testing affect this service?
Texas ended its annual safety inspection for most non-commercial vehicles in 2025; emissions testing still applies in designated metro counties. Confirm current requirements with the Texas DMV. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Texas and federal requirements.
Is C0265 always the module?
It is the strongest single indicator on this platform, but it is not proof. Before condemning the module, confirm it has clean battery voltage and a good ground at its connector, and look hard at the connector itself for corrosion — these trucks are old enough that a green, crusty connector is a genuinely common finding, and that is a wiring repair rather than a module repair. If power, ground and connector are all good and C0265 keeps coming back, the module is the prime suspect.
My ABS light is on but the code is for a wheel speed sensor. Do I need this?
No — and this is the most useful thing we can tell you. A single-wheel code in the C022x range is almost always that sensor, its wiring, or the hub bearing assembly it is built into. Hub failure on these trucks is extremely common at this age. A module repair will not fix it. Start at the wheel.

Full details

See the complete GM Kelsey-Hayes 325 ABS Repair service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

Ship from Texas today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Houston: about a week.

(817) 678-3252