2011 · GMC · SIERRA 1500

2011 GMC Sierra 1500 GM TEHCM Solenoid-Pack TCM Clone

6L80 TEHCM clone — avoids dealer SPS. Bench-program by mail at our Arlington, TX workshop — $$250 flat, typical 24-hour turnaround, flat-rate return shipping at checkout.

Confirm fitment first

2011 GMC Sierra 1500 — what this service covers

We clone GM TEHCM (Transmission Electro-Hydraulic Control Module) data onto a new or donor solenoid pack so a replacement is effectively plug-and-play. On these transmissions the TCM is not a separate box — it is integrated into the valve body / solenoid pack, so replacing the pack means the module goes with it and the car sees a stranger. We copy your original TEHCM's identity: VIN, calibration, and the learned shift adaptation onto the donor, letting you avoid a dealer SPS (Service Programming System) session. Covers the RWD 6-speeds — 6L45 and 6L50 (Cadillac CTS, ATS, SRX, Camaro V6, Colorado / Canyon) and 6L80 and 6L90 (Silverado and Sierra 1500 through 3500HD, Tahoe, Suburban, Yukon, Yukon XL, Avalanche, Escalade, Express / Savana, Camaro SS, Pontiac G8, Chevrolet SS, Cadillac CTS-V) — and the FWD / AWD 6-speeds — 6T70, 6T75 and 6T80 (Malibu, Impala, Equinox, Terrain, LaCrosse, Regal, Traverse, Acadia, Enclave), roughly 2006-2020 depending on platform. $250 flat. This is module DATA transfer, not a transmission rebuild: the donor solenoid pack must match the family and part number, a shift-adaptation relearn drive cycle is completed at the car after install, and mechanical valve-body wear is a separate repair. A technician verifies the part number by VIN and module label before you ship anything.

Chassis context

6L80 TEHCM clone — avoids dealer SPS. GM TEHCM Solenoid-Pack TCM Clone on this chassis is a routine bench job — we've handled this exact year/model many times.

What you get

  • Your original TEHCM's VIN, calibration, and learned shift-adaptation data cloned onto the donor solenoid-pack module
  • Donor part-number and family compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the shift-adaptation relearn drive cycle to complete at the car
  • Straight answer up front if your donor is not a compatible match, before you pay

Common 2011 GMC Sierra 1500 symptoms this fixes

  • Valve body / solenoid pack replaced and the transmission won't shift right until the module is programmed
  • "Service Transmission" or wrench light with internal mode switch or solenoid performance codes
  • Used TEHCM installed and the vehicle is stuck in limp / failsafe (single-gear) mode
  • Harsh, delayed, or no shifts after a solenoid-pack swap on a 6L or 6T six-speed
  • New AC Delco solenoid-pack TEHCM that needs your VIN and calibration before install
  • You want to avoid a dealer SPS programming trip for a module you already have

How it works

1. Pay online

Secure online checkout, $250. Shipping address arrives by email.

2. Ship module

USPS to PO Box 120241, Arlington TX 76012 if you ship USPS — or 1009 Oakwood Ln # 120241, Arlington TX 76012 if you ship UPS or FedEx (UPS and FedEx cannot deliver to a PO Box).

3. Get it back

Typical 24-hour bench turnaround, return speed your choice at checkout.

2011 GMC Sierra 1500 FAQ

Vehicle-specific answers.

Does AML handle 2011 GMC Sierra 1500 gm tehcm solenoid-pack tcm clone?
Yes. 2011 GMC Sierra 1500 (6L80 TEHCM clone — avoids dealer SPS) is fully supported by our GM TEHCM Solenoid-Pack TCM Clone bench process. Ship the module, we typically work it within 24 hours of receipt and ship back next business day at the return speed you chose at checkout.
How much does 2011 GMC Sierra 1500 gm tehcm solenoid-pack tcm clone cost?
$250 flat-rate. No diagnostic fee, no surprise charges. Return shipping is selected at checkout: $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air — flat nationwide.
What's the turnaround time?
Typical 24-hour bench turnaround at our Arlington TX workshop, plus shipping each way. Round-trip from anywhere in the US: typically 5-7 days.
What do I need to ship for a 2011 GMC Sierra 1500 job?
Your original TEHCM / solenoid pack (for the clone) AND the donor solenoid-pack TEHCM · Year, make, model, engine, and transmission (e.g. 2015 Silverado 1500 5.3L 6L80) · VIN of the vehicle · GM part number off BOTH module / solenoid-pack labels — we pre-verify the match
Will this work if my 2011 GMC Sierra 1500 has had a failed coding attempt before?
Yes — recovery from botched programming is a routine part of what we do. If you've tried a key job, an immobilizer attempt, or a cluster swap that went wrong, ship us what you have plus a quick description of what was attempted. We'll restore it.
How do I confirm fitment before shipping?
Text us at (817) 678-3252 with a photo of the module label + your VIN. We'll confirm fitment for your 2011 GMC Sierra 1500 within minutes during business hours.

Other vehicles we serve for GM TEHCM Solenoid-Pack TCM Clone

Ready to ship your 2011 GMC Sierra 1500's module?

Pay online, get the shipping address by email, send the module, get it back within a week.

(817) 678-3252