Auto Module Lab logoAUTO MODULELAB
OREGON · MAIL-IN SERVICE

JLR CEM / Fuse-Box BCM Clone in Oregon

Ship your module from Portland or anywhere in Oregon — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from OR
Text Before You Buy

Why Oregon customers mail in jlr cem / fuse-box bcm clone

Oregon has roughly 3.4 million registered vehicles, and trucks, SUVs & imports make up much of what Portland-area shops and owners mail us. European platforms cluster in Portland, Salem, Eugene, and most local Portland shops sub bench jobs like jlr cem / fuse-box bcm clone to a specialist instead of tooling up for one car. Cross-country northwest — about 3 days each way.

Metros we serve in Oregon

PortlandSalemEugeneGresham

Oregon at a glance

  • ~3.4M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Oregon requires DEQ emissions testing in the Portland and Medford metro areas; the rest of the state is exempt.

What you get

  • Your original CEM/BCM data — VIN, configuration, and immobilizer relationship — cloned onto the part-number-matched donor you supply
  • Front and rear CJB data both transferred on Jaguar platforms that use a two-module setup
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before a single byte is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — what to expect at first key-on and whether any on-car relearn applies
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Oregon ↔ Arlington TX

USPS Priority routes far northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Portland or anywhere in Oregon:

  1. Day 0

    You ship

    USPS Priority from OR, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Oregon FAQ

Common questions from customers shipping from Oregon.

How long does shipping take from Oregon to your Arlington TX workshop?
USPS Priority Mail from Portland, OR reaches our Arlington workshop in about 3 business days. USPS Priority routes far northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Oregon?
USPS Priority flat-rate from Oregon to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Oregon is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept jlr cem / fuse-box bcm clone modules from Oregon?
Yes — we receive modules from Portland, Salem, Eugene, Gresham and the rest of Oregon regularly. With about 3.4 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Oregon.
Is there a jlr cem / fuse-box bcm clone shop in Portland I should use instead?
Most Portland shops don't keep the bench equipment for jlr cem / fuse-box bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Oregon vehicle inspection or emissions testing affect this service?
Oregon requires DEQ emissions testing in the Portland and Medford metro areas; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Oregon and federal requirements.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both module part labels, you ship the units to Auto Module Lab in Arlington, TX. We clone the data on the bench, test communication, and ship both back with tracking — return speed your choice at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95). Inbound shipping to the lab is customer-paid with your choice of carrier.
What is the CEM and why does a used one never just work?
The CEM (Central Electronic Module) is the central junction box / fuse-box body control module on Land Rover, Range Rover, and Jaguar. It stores the VIN, the car's factory configuration, and the immobilizer relationship. A used module from another vehicle still carries that donor car's identity, so it will not work in yours until your original data is cloned onto it. That is exactly what this service does.

Full details

See the complete JLR CEM / Fuse-Box BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Oregon today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Portland: about a week.

(817) 678-3252