2015 Land Rover Range Rover JLR CEM / Fuse-Box BCM Clone

2015 Land Rover Range Rover — what this service covers

We clone the CEM (Central Electronic Module) — the central junction box / fuse-box body control module — on Land Rover, Range Rover, and Jaguar, on the bench. This module stores the VIN, factory configuration, and the immobilizer relationship, so a bare replacement almost never works when you plug it in. We copy the complete data from your original CEM/BCM onto a part-number-matched donor you supply, so the replacement drops in like the original never left — no dealer coding trip. Coverage spans L322 Range Rover (2002-2012), L320 Range Rover Sport (2005-2013), LR3 / Discovery 3 (2004-2009), LR4 / Discovery 4 (2009-2016), L405 Range Rover (2013-2021), L494 Range Rover Sport (2014-2021), L462 Discovery 5, L560 Range Rover Velar, and the LR2 / Freelander 2 central junction box, plus Jaguar CEM/BCM (XF 2009-2015 front and rear CJB data transfer, and XE / XF / F-Pace / I-Pace JPLA-14F041-BG and -BD modules). This is distinct from our KVM / RFA key-module service and from our CPLA engine-ECM clone. The donor must match your part number, a dead or unreadable original cannot be cloned, and a technician verifies compatibility by VIN and module label before you ship anything. $250 flat.

What you get

• Your original CEM/BCM data — VIN, configuration, and immobilizer relationship — cloned onto the part-number-matched donor you supply
• Front and rear CJB data both transferred on Jaguar platforms that use a two-module setup
• Donor part-number compatibility verified by VIN and module label before you ship
• Bench read + verify of both units before a single byte is written
• Bench communication test on a stable, regulated power supply before return
• Clear install notes — what to expect at first key-on and whether any on-car relearn applies

Common 2015 Land Rover Range Rover symptoms this fixes

• ✓Water intrusion flooded the fuse box / CEM and the vehicle now will not start
• ✓Multiple simultaneous electrical faults traced to a failed central electronic module
• ✓Used CEM installed and it refuses to work — carries the donor car's identity, not yours
• ✓Dead CEM being replaced and you want your VIN, config, and immobilizer data carried over
• ✓Corrosion- or heat-damaged CEM that still powers up — clone it before total failure
• ✓You want a second-hand fuse-box module made plug-and-play for your exact VIN

How it works

2015 Land Rover Range Rover FAQ

Vehicle-specific answers.

Other vehicles we serve for JLR CEM / Fuse-Box BCM Clone