Auto Module Lab logoAUTO MODULELAB
MONTANA · MAIL-IN SERVICE

Porsche DME / Engine ECU Clone in Montana

Ship your module from Billings or anywhere in Montana — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from MT
Text Before You Buy

Why Montana customers mail in porsche dme / engine ecu clone

Montana has roughly 1.7 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Billings-area shops and owners mail us. European platforms cluster in Billings, Missoula, Great Falls, and most local Billings shops sub bench jobs like porsche dme / engine ecu clone to a specialist instead of tooling up for one car. Cross-country northwest — about 3 days each way.

Metros we serve in Montana

BillingsMissoulaGreat FallsBozeman

Montana at a glance

  • ~1.7M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Montana has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original DME's identity, immobilizer relationship, and calibration cloned onto the donor, where the original reads
  • Donor Bosch and Porsche part-number compatibility verified by VIN and ECU label before you ship
  • Bench read plus verification of both units before anything is written
  • Checksum and write verification on the donor after the clone
  • An honest call before any charge if the original will not read and the job is not a clone
  • Bench communication test on a stable, regulated power supply before return
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Montana ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Billings or anywhere in Montana:

  1. Day 0

    You ship

    USPS Priority from MT, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Montana FAQ

Common questions from customers shipping from Montana.

How long does shipping take from Montana to your Arlington TX workshop?
USPS Priority Mail from Billings, MT reaches our Arlington workshop in about 3 business days. USPS Priority routes northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Montana?
USPS Priority flat-rate from Montana to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Montana is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept porsche dme / engine ecu clone modules from Montana?
Yes — we receive modules from Billings, Missoula, Great Falls, Bozeman and the rest of Montana regularly. With about 1.7 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Montana.
Is there a porsche dme / engine ecu clone shop in Billings I should use instead?
Most Billings shops don't keep the bench equipment for porsche dme / engine ecu clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Montana vehicle inspection or emissions testing affect this service?
Montana has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Montana and federal requirements.
Can you tune it or remove emissions equipment while it is on the bench?
No. We do not perform emissions-related edits of any kind — no catalyst, EGR, or secondary-air removal, no exceptions. This is a cloning and programming service that reproduces your car's factory configuration on replacement hardware. If your original carried an aftermarket tune, tell us before you ship so we can set expectations about what is on the file we read.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both DME part numbers, you ship the units to Auto Module Lab in Arlington, TX — this is a mail-in bench service, we do not come to the car. We clone on the bench, verify the write, test communication, and ship both units back with tracking. Return shipping is your choice at checkout: Standard $29.95, UPS 2-Day $54.95, or UPS overnight $94.95.

Full details

See the complete Porsche DME / Engine ECU Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Montana today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Billings: about a week.

(817) 678-3252