Auto Module Lab logoAUTO MODULELAB
OKLAHOMA · MAIL-IN SERVICE

Porsche DME / Engine ECU Clone in Oklahoma

Ship your module from Oklahoma City or anywhere in Oklahoma — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~1 day USPS from OK
Text Before You Buy

Why Oklahoma customers mail in porsche dme / engine ecu clone

Oklahoma has roughly 3.6 million registered vehicles, and full-size pickups & SUVs make up much of what Oklahoma City-area shops and owners mail us. European platforms cluster in Oklahoma City, Tulsa, Norman, and most local Oklahoma City shops sub bench jobs like porsche dme / engine ecu clone to a specialist instead of tooling up for one car. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.

Metros we serve in Oklahoma

Oklahoma CityTulsaNormanBroken Arrow

Oklahoma at a glance

  • ~3.6M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Oklahoma has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original DME's identity, immobilizer relationship, and calibration cloned onto the donor, where the original reads
  • Donor Bosch and Porsche part-number compatibility verified by VIN and ECU label before you ship
  • Bench read plus verification of both units before anything is written
  • Checksum and write verification on the donor after the clone
  • An honest call before any charge if the original will not read and the job is not a clone
  • Bench communication test on a stable, regulated power supply before return
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Oklahoma ↔ Arlington TX

USPS Priority is a quick hop north from the North Texas network; often next-day. Typical round-trip from Oklahoma City or anywhere in Oklahoma:

  1. Day 0

    You ship

    USPS Priority from OK, ~$9

  2. Day 1

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 3

    Back to you

    Return speed you chose at checkout

Oklahoma FAQ

Common questions from customers shipping from Oklahoma.

How long does shipping take from Oklahoma to your Arlington TX workshop?
USPS Priority Mail from Oklahoma City, OK reaches our Arlington workshop in about 1 business day. USPS Priority is a quick hop north from the North Texas network; often next-day. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Oklahoma?
USPS Priority flat-rate from Oklahoma to Arlington TX runs about $9. The customer pays shipping to us; return shipping back to Oklahoma is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.
Do you accept porsche dme / engine ecu clone modules from Oklahoma?
Yes — we receive modules from Oklahoma City, Tulsa, Norman, Broken Arrow and the rest of Oklahoma regularly. With about 3.6 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Oklahoma.
Is there a porsche dme / engine ecu clone shop in Oklahoma City I should use instead?
Most Oklahoma City shops don't keep the bench equipment for porsche dme / engine ecu clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.
Does Oklahoma vehicle inspection or emissions testing affect this service?
Oklahoma has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Oklahoma and federal requirements.
Can you tune it or remove emissions equipment while it is on the bench?
No. We do not perform emissions-related edits of any kind — no catalyst, EGR, or secondary-air removal, no exceptions. This is a cloning and programming service that reproduces your car's factory configuration on replacement hardware. If your original carried an aftermarket tune, tell us before you ship so we can set expectations about what is on the file we read.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both DME part numbers, you ship the units to Auto Module Lab in Arlington, TX — this is a mail-in bench service, we do not come to the car. We clone on the bench, verify the write, test communication, and ship both units back with tracking. Return shipping is your choice at checkout: Standard $29.95, UPS 2-Day $54.95, or UPS overnight $94.95.

Full details

See the complete Porsche DME / Engine ECU Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Oklahoma today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Oklahoma City: about a week.

(817) 678-3252