Auto Module Lab logoAUTO MODULELAB
WYOMING · MAIL-IN SERVICE

Porsche DME / Engine ECU Clone in Wyoming

Ship your module from Cheyenne or anywhere in Wyoming — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from WY
Text Before You Buy

Why Wyoming customers mail in porsche dme / engine ecu clone

Wyoming has roughly 0.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Cheyenne-area shops and owners mail us. European platforms cluster in Cheyenne, Casper, Laramie, and most local Cheyenne shops sub bench jobs like porsche dme / engine ecu clone to a specialist instead of tooling up for one car. Cross-region northwest — about 2-3 days each way.

Metros we serve in Wyoming

CheyenneCasperLaramieGillette

Wyoming at a glance

  • ~0.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Wyoming has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original DME's identity, immobilizer relationship, and calibration cloned onto the donor, where the original reads
  • Donor Bosch and Porsche part-number compatibility verified by VIN and ECU label before you ship
  • Bench read plus verification of both units before anything is written
  • Checksum and write verification on the donor after the clone
  • An honest call before any charge if the original will not read and the job is not a clone
  • Bench communication test on a stable, regulated power supply before return
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Wyoming ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Cheyenne or anywhere in Wyoming:

  1. Day 0

    You ship

    USPS Priority from WY, ~$11

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Wyoming FAQ

Common questions from customers shipping from Wyoming.

How long does shipping take from Wyoming to your Arlington TX workshop?
USPS Priority Mail from Cheyenne, WY reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Wyoming?
USPS Priority flat-rate from Wyoming to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Wyoming is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region northwest — about 2-3 days each way.
Do you accept porsche dme / engine ecu clone modules from Wyoming?
Yes — we receive modules from Cheyenne, Casper, Laramie, Gillette and the rest of Wyoming regularly. With about 0.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Wyoming.
Is there a porsche dme / engine ecu clone shop in Cheyenne I should use instead?
Most Cheyenne shops don't keep the bench equipment for porsche dme / engine ecu clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region northwest — about 2-3 days each way.
Does Wyoming vehicle inspection or emissions testing affect this service?
Wyoming has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Wyoming and federal requirements.
Which Porsches does this cover?
The advertised coverage is the Bosch ME7.8 DME on the 996-generation 911 and the 986 Boxster, roughly 1998-2004, and the Bosch ME7.1.1 on the 955 / 9PA Cayenne, roughly 2003-2006. Related Bosch ME7 units on early 987 Boxster and Cayman are supported where the hardware matches. 996 Turbo and GT variants, late 9PA facelift cars, and 997-and-newer 911s are verified case by case — send the VIN and DME label photo and we give you a straight answer before you order.
Why does a used Porsche DME crank but not start?
Because the DME holds an immobilizer relationship with the car's alarm and immobilizer control unit. A used ECU still carries the donor car's identity and expects the donor car's immobilizer, so your starter turns the engine over and the DME never authorises fuel and spark. Cloning copies your original's identity and immobilizer data onto the donor, so the car and the ECU recognise each other again.

Full details

See the complete Porsche DME / Engine ECU Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Wyoming today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Cheyenne: about a week.

(817) 678-3252