Auto Module Lab logoAUTO MODULELAB
MASSACHUSETTS · MAIL-IN SERVICE

Volvo Engine ECU Clone (Denso & Bosch) in Massachusetts

Ship your module from Boston or anywhere in Massachusetts — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from MA
Text Before You Buy

Why Massachusetts customers mail in volvo engine ecu clone (denso & bosch)

Massachusetts has roughly 5 million registered vehicles, and European luxury (BMW, Mercedes, Audi) make up much of what Boston-area shops and owners mail us. European platforms cluster in Boston, Worcester, Springfield, and most local Boston shops sub bench jobs like volvo engine ecu clone (denso & bosch) to a specialist instead of tooling up for one car. Cross-country northeast — about 3 days each way.

Metros we serve in Massachusetts

BostonWorcesterSpringfieldCambridge

Massachusetts at a glance

  • ~5M registered vehicles statewide
  • Most common: European luxury (BMW, Mercedes, Audi)
  • Massachusetts requires an annual combined safety and OBD-II emissions inspection statewide.

What you get

  • Your original ECU's immobilizer and VIN data cloned onto a hardware-matched donor, where supported
  • Denso or Bosch ME9.0 ECU prepared so it runs plug-and-play after install
  • Factory immobilizer kept fully active (this is not an immo delete)
  • Bench read + verify of both units before anything is written
  • Bench communication tested with a stable, regulated power supply
  • Clear install notes for the ECU reinstall
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Massachusetts ↔ Arlington TX

USPS Priority routes northeast through the New England network; typically 3 days. Typical round-trip from Boston or anywhere in Massachusetts:

  1. Day 0

    You ship

    USPS Priority from MA, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Massachusetts FAQ

Common questions from customers shipping from Massachusetts.

How long does shipping take from Massachusetts to your Arlington TX workshop?
USPS Priority Mail from Boston, MA reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the New England network; typically 3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Massachusetts?
USPS Priority flat-rate from Massachusetts to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Massachusetts is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept volvo engine ecu clone (denso & bosch) modules from Massachusetts?
Yes — we receive modules from Boston, Worcester, Springfield, Cambridge and the rest of Massachusetts regularly. With about 5 million registered vehicles statewide, European luxury (BMW, Mercedes, Audi) are the bulk of what we see from Massachusetts.
Is there a volvo engine ecu clone (denso & bosch) shop in Boston I should use instead?
Most Boston shops don't keep the bench equipment for volvo engine ecu clone (denso & bosch) — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does Massachusetts vehicle inspection or emissions testing affect this service?
Massachusetts requires an annual combined safety and OBD-II emissions inspection statewide. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Massachusetts and federal requirements.
Which Volvo ECUs does this cover?
Both suppliers Volvo used. Denso engine ECUs with part numbers in the 279700-xxxx family, including Drive-E and earlier Denso applications; and Bosch ME9.0 engine ECUs on the P1 platform T5 cars — S40, V50, C30 and C70, roughly 2004-2013, in 2.4i and T5 five-cylinder form — plus related Bosch ME units on the same family where supported. A technician confirms your exact ECU by VIN and module label before you ship, and verifies that your donor is a part-number match.
Do you clone the Bosch ME9.0 in an S40, V50, C30 or C70 T5?
Yes — that is a covered application on this same page, at the same $250 flat price. Those P1 platform cars run a Bosch ME9.0 engine ECU rather than a Denso unit, and it is immobilizer-paired to the CEM the same way, so a junkyard ME9.0 will crank and not start until its identity matches your car. Send the original plus a part-number-matched Bosch donor and we transfer the data on the bench.

Full details

See the complete Volvo Engine ECU Clone (Denso & Bosch) service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Massachusetts today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Boston: about a week.

(817) 678-3252