Denso · petrol · 2009–2015
Toyota ECU 89661-0T xxx — Venza engine ECU
First-generation Venza 2.7 and 3.5 (89661-0T053, 89661-0T081 AWD).
Models fitted with 89661-0T
Prefix-to-application pairing checked against published parts data on 2026-10-14.
Clone the 89661-0T ECU — $350 flat
Mail your original and a donor with the same full part number. VIN, immobilizer data, coding and adaptations are copied across on the bench, typically within 24 hours of arrival. Factory immobilizer stays on.
Toyota / Lexus / Scion engine ECU cloneOn-car software step — remote Techstream, $250
Some cars still want an on-car step after a module swap — an ECU communication ID registration on a smart-key car, a calibration update, or a key registration. Plug a J2534 pass-thru interface into the car and we run the factory Techstream software on it from our bench — no dealer visit. The same session covers programming after any other Toyota or Lexus module replacement.
Book the Toyota / Lexus remote sessionFrequently asked questions
What is Toyota ECU part number 89661-0T?
89661-0T is the model code of a Toyota / Lexus / Scion engine control unit in the Venza engine ECU family (Denso), common on 2009–2015 petrol cars. First-generation Venza 2.7 and 3.5 (89661-0T053, 89661-0T081 AWD). The rest of the number selects the exact calibration.
Which models use a 89661-0T ECU?
In the US: Venza AV10 (2009–2015). Always confirm with the label — the same model year can carry a different family on another engine or build.
Can you clone a 89661-0T ECU?
Yes. Mail your original 89661-0T unit and a donor with the same full part number and we copy your VIN, immobilizer data, coding and adaptations onto the donor for $350 flat, typically within 24 hours of arrival, immobilizer intact. If the car then asks for an on-car step, the remote Techstream session over J2534 is $250.