Toyota / Lexus / Scion · 100 / 200 / 250 series · 1998–2026
Land Cruiser 1998–2026 engine ECU part numbers
2 engines, 1 ECU part-number family. Find the controller your car runs, then clone it onto a donor or adapt it remotely.
Engines and their ECUs
| Engine | Engine codes | ECU family | Model code |
|---|---|---|---|
| 4.7 / 5.7 V8 (to 2021) | 2UZ-FE, 3UR-FE | Denso pre-CAN engine ECU / Denso Gen1 (NEC 76F00xx) / Denso Gen2 (D76F01xx / 02xx) | |
| 2.4 turbo hybrid (2024+) | T24A-FTS | Denso Gen3 (Renesas R7F7012xx, RH850) | confirmed by label |
4.7 / 5.7 V8 (to 2021)
2UZ-FE, 3UR-FE
Denso pre-CAN engine ECU / Denso Gen1 (NEC 76F00xx) / Denso Gen2 (D76F01xx / 02xx)
2.4 turbo hybrid (2024+)
T24A-FTS
Denso Gen3 (Renesas R7F7012xx, RH850)
The 2024+ 250-series is Gen3 — confirmed by label before payment.
The model code is the family-level part of the label (for example 89661-06X91). A donor must match the full number, which we confirm against your VIN for free before you buy.
Clone the Land Cruiser ECU — $350 flat
Mail your original and a donor with the same full part number. VIN, immobilizer data, coding and adaptations are copied across on the bench, typically within 24 hours of arrival. Factory immobilizer stays on.
Toyota / Lexus / Scion engine ECU cloneOn-car software step — remote Techstream, $250
Some cars still want an on-car step after a module swap — an ECU communication ID registration on a smart-key car, a calibration update, or a key registration. Plug a J2534 pass-thru interface into the car and we run the factory Techstream software on it from our bench — no dealer visit. The same session covers programming after any other Toyota or Lexus module replacement.
Book the Toyota / Lexus remote sessionFrequently asked questions
Which engine ECU does a 1998–2026 Land Cruiser have?
It depends on the engine. The 4.7 / 5.7 V8 (to 2021) (2UZ-FE, 3UR-FE) runs Denso pre-CAN engine ECU / Denso Gen1 (NEC 76F00xx) / Denso Gen2 (D76F01xx / 02xx), model code 89661-60. The 2.4 turbo hybrid (2024+) (T24A-FTS) runs Denso Gen3 (Renesas R7F7012xx, RH850) — the model code is confirmed from your label. The label on your module settles it in seconds.
Can you clone the ECU on a Land Cruiser 100 / 200 / 250 series?
Yes — every engine ECU on this generation is a routine bench clone. Mail your original and a donor with the same full part number and we copy the VIN, immobilizer data, coding and adaptations across for $350 flat, typically within 24 hours of arrival.
Will a cloned Land Cruiser ECU need dealer adaptation?
Usually not — it leaves the bench carrying your VIN, immobilizer data, coding and adaptations. If the car still asks for an on-car step, we run it remotely with Techstream over your J2534 interface for $250.