Toyota / Lexus / Scion · xB (2004–2015), xD (2008–2014) · 2004–2015

Scion xB / xD 2004–2015 engine ECU part numbers

3 engines, 2 ECU part-number families. Find the controller your car runs, then clone it onto a donor or adapt it remotely.

Routine bench clone on every engine listed

Engines and their ECUs

1.5 4-cyl (first-gen xB)

1NZ-FE

Denso pre-CAN engine ECU

model code confirmed by label

2.4 4-cyl (xB 2008–2015)

2AZ-FE

Denso Gen1 (NEC 76F00xx) / Denso Gen2 (D76F01xx / 02xx)

1.8 4-cyl (xD)

2ZR-FE

Denso Gen1 (NEC 76F00xx) / Denso Gen2 (D76F01xx / 02xx)

The Scion FR-S runs a Subaru engine ECU and belongs to the Subaru catalog, not this one.

The model code is the family-level part of the label (for example 89661-06X91). A donor must match the full number, which we confirm against your VIN for free before you buy.

Clone the Scion xB / xD ECU — $350 flat

Mail your original and a donor with the same full part number. VIN, immobilizer data, coding and adaptations are copied across on the bench, typically within 24 hours of arrival. Factory immobilizer stays on.

Toyota / Lexus / Scion engine ECU clone

On-car software step — remote Techstream, $250

Some cars still want an on-car step after a module swap — an ECU communication ID registration on a smart-key car, a calibration update, or a key registration. Plug a J2534 pass-thru interface into the car and we run the factory Techstream software on it from our bench — no dealer visit. The same session covers programming after any other Toyota or Lexus module replacement.

Book the Toyota / Lexus remote session

Frequently asked questions

Which engine ECU does a 2004–2015 Scion xB / xD have?

It depends on the engine. The 1.5 4-cyl (first-gen xB) (1NZ-FE) runs Denso pre-CAN engine ECU — the model code is confirmed from your label. The 2.4 4-cyl (xB 2008–2015) (2AZ-FE) runs Denso Gen1 (NEC 76F00xx) / Denso Gen2 (D76F01xx / 02xx), model code 89661-12. The 1.8 4-cyl (xD) (2ZR-FE) runs Denso Gen1 (NEC 76F00xx) / Denso Gen2 (D76F01xx / 02xx), model code 89661-52. The label on your module settles it in seconds.

Can you clone the ECU on a Scion xB / xD xB (2004–2015), xD (2008–2014)?

Yes — every engine ECU on this generation is a routine bench clone. Mail your original and a donor with the same full part number and we copy the VIN, immobilizer data, coding and adaptations across for $350 flat, typically within 24 hours of arrival.

Will a cloned Scion xB / xD ECU need dealer adaptation?

Usually not — it leaves the bench carrying your VIN, immobilizer data, coding and adaptations. If the car still asks for an on-car step, we run it remotely with Techstream over your J2534 interface for $250.

← All Toyota / Lexus / Scion models and ECU part numbers