Bosch · petrol · 2015–2021
VW ECU 06K 907 309 xxx — Bosch MED17.5.21
EA888 Gen3 high-output 2.0T — Golf R and GTI (Mk7). Check the label against 06K 907 425 and 5G0 906 259.
Models fitted with 06K 907 309
Pairing from bench experience — confirm with the label on your module before buying a donor.
Clone the 06K 907 309 ECU — $350 flat
Mail your original and a donor with the same full part number. VIN, immobilizer data, coding and adaptations are copied across on the bench, typically within 24 hours of arrival. Factory immobilizer stays on.
Volkswagen engine ECU cloneOn-car software step — remote ODIS, $250
Some cars still want an on-car step after a module swap: a software version management (SVM) update, coding, or a basic-settings adaptation. Plug a J2534 pass-thru interface into the car and we run the factory ODIS software on it from our bench — no dealer visit. The same session covers coding after any other VW or Audi module replacement.
Book the VW / Audi remote sessionFrequently asked questions
What is VW ECU part number 06K 907 309?
06K 907 309 is the part-number prefix of a Volkswagen engine control unit in the Bosch MED17.5.21 family (Bosch), common on 2015–2021 petrol cars. EA888 Gen3 high-output 2.0T — Golf R and GTI (Mk7). Check the label against 06K 907 425 and 5G0 906 259. The rest of the number selects the exact calibration.
Which models use a 06K 907 309 ECU?
In the US: Golf / GTI / Golf R / SportWagen / Alltrack Mk7 (MQB) (2015–2021). Always confirm with the label — the same model year can carry a different family on another engine or build.
Can you clone a 06K 907 309 ECU?
Yes. Mail your original 06K 907 309 unit and a donor with the same full part number and we copy your VIN, immobilizer data, coding and adaptations onto the donor for $350 flat, typically within 24 hours of arrival, immobilizer intact. If the car then asks for an on-car step, the remote ODIS session over J2534 is $250.