Volkswagen · Gen 1 (7L) and Gen 2 (7P) · 2004–2017
Touareg 2004–2017 engine ECU part numbers
7 engines, 4 ECU part-number families. Find the controller your car runs, then clone it onto a donor or adapt it remotely.
Engines and their ECUs
| Engine | Engine codes | ECU family | Part-number prefix |
|---|---|---|---|
| 3.2 VR6 (2004–2007) | AZZ, BMV, BKJ | Bosch ME7.1.1 | |
| 3.6 VR6 FSI (2008–2010) | BHK, BHL | Bosch MED9.1.1 | |
| 3.6 VR6 (2011–2017) | CGRA | Bosch MED17 — confirm by label | confirmed by label |
| 4.2 V8 FSI | AXQ, BAR | Bosch ME7.1.1 / MED9.1.1 — confirm by label | confirmed by label |
| 3.0 V6 TDI (2009–2010) | CATA | Bosch EDC17CP14 | |
| 3.0 V6 TDI (2011–2016) | CNRB | Bosch EDC17CP44 | |
| 5.0 V10 TDI (2004–2008) | AYH, BWF | Bosch EDC16 — confirm by label | confirmed by label |
3.6 VR6 (2011–2017)
CGRA
Bosch MED17 — confirm by label
4.2 V8 FSI
AXQ, BAR
Bosch ME7.1.1 / MED9.1.1 — confirm by label
5.0 V10 TDI (2004–2008)
AYH, BWF
Bosch EDC16 — confirm by label
The part-number prefix is the family-level part of the label (for example 06J 906 026 CK). A donor must match the full number, which we confirm against your VIN for free before you buy.
Clone the Touareg ECU — $350 flat
Mail your original and a donor with the same full part number. VIN, immobilizer data, coding and adaptations are copied across on the bench, typically within 24 hours of arrival. Factory immobilizer stays on.
Volkswagen engine ECU cloneOn-car software step — remote ODIS, $250
Some cars still want an on-car step after a module swap: a software version management (SVM) update, coding, or a basic-settings adaptation. Plug a J2534 pass-thru interface into the car and we run the factory ODIS software on it from our bench — no dealer visit. The same session covers coding after any other VW or Audi module replacement.
Book the VW / Audi remote sessionFrequently asked questions
Which engine ECU does a 2004–2017 Touareg have?
It depends on the engine. The 3.2 VR6 (2004–2007) (AZZ, BMV, BKJ) runs Bosch ME7.1.1, part-number prefix 022 906 032. The 3.6 VR6 FSI (2008–2010) (BHK, BHL) runs Bosch MED9.1.1, part-number prefix 03H 906 032. The 3.6 VR6 (2011–2017) (CGRA) runs Bosch MED17 — confirm by label — the part-number prefix is confirmed from your label. The 4.2 V8 FSI (AXQ, BAR) runs Bosch ME7.1.1 / MED9.1.1 — confirm by label — the part-number prefix is confirmed from your label. The 3.0 V6 TDI (2009–2010) (CATA) runs Bosch EDC17CP14, part-number prefix 7L0 907 401. The 3.0 V6 TDI (2011–2016) (CNRB) runs Bosch EDC17CP44, part-number prefix 7P0 907 401. The 5.0 V10 TDI (2004–2008) (AYH, BWF) runs Bosch EDC16 — confirm by label — the part-number prefix is confirmed from your label. The label on your module settles it in seconds.
Can you clone the ECU on a Touareg Gen 1 (7L) and Gen 2 (7P)?
Yes — every engine ECU on this generation is a routine bench clone. Mail your original and a donor with the same full part number and we copy the VIN, immobilizer data, coding and adaptations across for $350 flat, typically within 24 hours of arrival.
Will a cloned Touareg ECU need dealer adaptation?
Usually not — it leaves the bench carrying your VIN, immobilizer data, coding and adaptations. If the car still asks for an on-car step, we run it remotely with ODIS over your J2534 interface for $250.