Auto Module Lab logoAUTO MODULELAB
GEORGIA · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in Georgia

Ship your module from Atlanta or anywhere in Georgia — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from GA
Text Before You Buy

Why Georgia customers mail in chrysler / dodge / jeep bcm clone

Georgia has roughly 8.4 million registered vehicles, and trucks, SUVs & imports make up much of what Atlanta-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across Georgia — we see a steady stream out of Atlanta, Augusta, Savannah. Cross-region southeast — about 2 days each way.

Metros we serve in Georgia

AtlantaAugustaSavannahColumbus

Georgia at a glance

  • ~8.4M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Georgia requires an annual emissions inspection in the 13 metro-Atlanta counties; the rest of the state is exempt.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Georgia ↔ Arlington TX

USPS Priority routes east through the Atlanta distribution hub; typically 2 days. Typical round-trip from Atlanta or anywhere in Georgia:

  1. Day 0

    You ship

    USPS Priority from GA, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Georgia FAQ

Common questions from customers shipping from Georgia.

How long does shipping take from Georgia to your Arlington TX workshop?
USPS Priority Mail from Atlanta, GA reaches our Arlington workshop in about 2 business days. USPS Priority routes east through the Atlanta distribution hub; typically 2 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Georgia?
USPS Priority flat-rate from Georgia to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Georgia is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region southeast — about 2 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from Georgia?
Yes — we receive modules from Atlanta, Augusta, Savannah, Columbus and the rest of Georgia regularly. With about 8.4 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Georgia.
Is there a chrysler / dodge / jeep bcm clone shop in Atlanta I should use instead?
Most Atlanta shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region southeast — about 2 days each way.
Does Georgia vehicle inspection or emissions testing affect this service?
Georgia requires an annual emissions inspection in the 13 metro-Atlanta counties; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Georgia and federal requirements.
Why doesn't a used BCM work when I just plug it in?
The BCM stores your VIN and your build's option content, and the rest of the vehicle network expects those values to match. A donor module is still describing the car it came out of, so the vehicle typically ignores it — dead dash, no crank, or a batch of unrelated electrical faults. Cloning copies your original's configuration, coding, and VIN across so the donor arrives already matching your vehicle.
Is a BCM the same thing as a TIPM?
No, and this is the single most common mix-up on these vehicles. The TIPM is the power distribution center — relays and high-current circuits. The BCM is the logic module that controls body functions and talks on the network. They fail differently and are serviced differently: if your problem is the power distribution unit, our TIPM service is the right listing, not this one.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Georgia today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Atlanta: about a week.

(817) 678-3252