Auto Module Lab logoAUTO MODULELAB
IDAHO · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in Idaho

Ship your module from Boise or anywhere in Idaho — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from ID
Text Before You Buy

Why Idaho customers mail in chrysler / dodge / jeep bcm clone

Idaho has roughly 1.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Boise-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across Idaho — we see a steady stream out of Boise, Nampa, Idaho Falls. Cross-country northwest — about 3 days each way.

Metros we serve in Idaho

BoiseNampaIdaho FallsCoeur d'Alene

Idaho at a glance

  • ~1.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Idaho requires emissions testing only in the Treasure Valley (Ada and Canyon counties); the rest of the state is exempt.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Idaho ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Boise or anywhere in Idaho:

  1. Day 0

    You ship

    USPS Priority from ID, ~$12

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Idaho FAQ

Common questions from customers shipping from Idaho.

How long does shipping take from Idaho to your Arlington TX workshop?
USPS Priority Mail from Boise, ID reaches our Arlington workshop in about 3 business days. USPS Priority routes northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Idaho?
USPS Priority flat-rate from Idaho to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Idaho is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from Idaho?
Yes — we receive modules from Boise, Nampa, Idaho Falls, Coeur d'Alene and the rest of Idaho regularly. With about 1.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Idaho.
Is there a chrysler / dodge / jeep bcm clone shop in Boise I should use instead?
Most Boise shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Idaho vehicle inspection or emissions testing affect this service?
Idaho requires emissions testing only in the Treasure Valley (Ada and Canyon counties); the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Idaho and federal requirements.
Is a BCM the same thing as a TIPM?
No, and this is the single most common mix-up on these vehicles. The TIPM is the power distribution center — relays and high-current circuits. The BCM is the logic module that controls body functions and talks on the network. They fail differently and are serviced differently: if your problem is the power distribution unit, our TIPM service is the right listing, not this one.
Do I still need a dealer wiTECH session afterwards?
On supported applications, no — that is the point of cloning. The donor comes back carrying your original's configuration, coding, and VIN, so it installs plug-and-play. Some newer vehicles carry security-gateway (SGW) considerations for at-the-car steps, and where that applies to your VIN we tell you before you ship rather than after you have paid.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Idaho today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Boise: about a week.

(817) 678-3252