IDAHO · MAIL-IN SERVICE

Ford 6.7 Powerstroke PCM Repair in Idaho

Ship your module from Boise or anywhere in Idaho — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$395 flat Typical 3-5 Business Day Bench Turnaround ~3 day USPS from ID
Text Before You Buy

Why Idaho customers mail in ford 6.7 powerstroke pcm repair

Idaho has roughly 1.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Boise-area shops and owners mail us. Domestic work like ford 6.7 powerstroke pcm repair runs high-volume across Idaho — we see a steady stream out of Boise, Nampa, Idaho Falls. Cross-country northwest — about 3 days each way.

What we see from the West

Western trucks split into two duty cycles we see constantly: high-altitude towing and oilfield or ranch service with heavy idle hours. Both load the injector-drive side of the system harder than commuting does. Elevation itself does not damage a module, but the sustained high-load fuelling that comes with mountain grades and heavy trailers is real service life on the drivers.

Metros we serve in Idaho

BoiseNampaIdaho FallsCoeur d'Alene

Idaho at a glance

  • ~1.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Idaho requires emissions testing only in the Treasure Valley (Ada and Canyon counties); the rest of the state is exempt.

What you get

  • Your original PCM opened, inspected and tested on the bench
  • Board-level repair of supply sections, driver stages and failed joints
  • Your calibration preserved through the repair where the work touches memory
  • Communication and outputs verified before it ships back
  • Thermal cycling for intermittent faults that only appear warm
  • A straight answer first if the board is beyond economical repair

Shipping timeline — Idaho ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Boise or anywhere in Idaho:

  1. Day 0

    You ship

    USPS Priority from ID, ~$12

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Idaho FAQ

Common questions from customers shipping from Idaho.

How long does shipping take from Idaho to your Arlington TX workshop?
USPS Priority Mail from Boise, ID reaches our Arlington workshop in about 3 business days. USPS Priority routes northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Idaho?
USPS Priority flat-rate from Idaho to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Idaho is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept ford 6.7 powerstroke pcm repair modules from Idaho?
Yes — we receive modules from Boise, Nampa, Idaho Falls, Coeur d'Alene and the rest of Idaho regularly. With about 1.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Idaho.
Is there a ford 6.7 powerstroke pcm repair shop in Boise I should use instead?
Most Boise shops don't keep the bench equipment for ford 6.7 powerstroke pcm repair — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Idaho vehicle inspection or emissions testing affect this service?
Idaho requires emissions testing only in the Treasure Valley (Ada and Canyon counties); the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Idaho and federal requirements.
Is there a warranty?
Yes, our standard 6-month workmanship warranty on the repair performed. It covers the repair itself, not unrelated faults on the truck or a different section of the board failing later.
Can a fleet send several modules at once?
Yes. Include a note identifying each module by unit or VIN so they come back matched to the right truck, and text us before shipping so we can plan the bench time. Fleet and shop work is a normal part of what we do.

Full details

See the complete Ford 6.7 Powerstroke PCM Repair service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

Ship from Idaho today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Boise: about a week.

(817) 678-3252