Auto Module Lab logoAUTO MODULELAB
FLORIDA · MAIL-IN SERVICE

Ford EEC-V PCM Clone / Programming in Florida

Ship your module from Miami or anywhere in Florida — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from FL
Text Before You Buy

Why Florida customers mail in ford eec-v pcm clone / programming

Florida has roughly 18 million registered vehicles, and European luxury (BMW, Mercedes, Audi) make up much of what Miami-area shops and owners mail us. Domestic work like ford eec-v pcm clone / programming runs high-volume across Florida — we see a steady stream out of Miami, Tampa, Orlando. Cross-region southeast — about 2-3 days each way.

Metros we serve in Florida

MiamiTampaOrlandoJacksonville

Florida at a glance

  • ~18M registered vehicles statewide
  • Most common: European luxury (BMW, Mercedes, Audi)
  • Florida has no state vehicle safety or emissions inspection program.

What you get

  • Your original PCM's data transferred to a hardware-matched donor — true clone where the platform supports it
  • Or the donor bench-flashed with the correct calibration for your VIN when a full clone isn't supported
  • Straight answer BEFORE you ship: true clone, calibration clone, or replacement programming — mapped from your service number
  • Bench read + verify of both units before anything is written
  • Bench communication test with a stable, regulated power supply
  • Clear install notes — including whether a PATS parameter reset or key programming applies at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Florida ↔ Arlington TX

USPS Priority routes southeast through the Gulf network; usually 2-3 days to the peninsula. Typical round-trip from Miami or anywhere in Florida:

  1. Day 0

    You ship

    USPS Priority from FL, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Florida FAQ

Common questions from customers shipping from Florida.

How long does shipping take from Florida to your Arlington TX workshop?
USPS Priority Mail from Miami, FL reaches our Arlington workshop in about 2-3 business days. USPS Priority routes southeast through the Gulf network; usually 2-3 days to the peninsula. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Florida?
USPS Priority flat-rate from Florida to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Florida is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-region southeast — about 2-3 days each way.
Do you accept ford eec-v pcm clone / programming modules from Florida?
Yes — we receive modules from Miami, Tampa, Orlando, Jacksonville and the rest of Florida regularly. With about 18 million registered vehicles statewide, European luxury (BMW, Mercedes, Audi) are the bulk of what we see from Florida.
Is there a ford eec-v pcm clone / programming shop in Miami I should use instead?
Most Miami shops don't keep the bench equipment for ford eec-v pcm clone / programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region southeast — about 2-3 days each way.
Does Florida vehicle inspection or emissions testing affect this service?
Florida has no state vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Florida and federal requirements.
How do I pick a compatible donor PCM?
Match the service number and hardware (catch) code on your original's label as closely as possible — same catch code is the gold standard. Original and replacement PCM must normally be hardware-compatible; a same-year same-engine truck is not automatically a match. Send us your label photo and the donor listing before you buy and we confirm it, free.
My original PCM is completely dead — can you still program a donor?
Yes — that becomes replacement programming: we bench-flash the donor with the correct factory calibration for your VIN and engine/transmission combination, and any PATS initialization is finished at the vehicle. You lose nothing except the original's stored adaptations, which relearn on their own.

Full details

See the complete Ford EEC-V PCM Clone / Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Florida today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Miami: about a week.

(817) 678-3252