Auto Module Lab logoAUTO MODULELAB
IOWA · MAIL-IN SERVICE

Ford EEC-V PCM Clone / Programming in Iowa

Ship your module from Des Moines or anywhere in Iowa — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from IA
Text Before You Buy

Why Iowa customers mail in ford eec-v pcm clone / programming

Iowa has roughly 3.4 million registered vehicles, and full-size pickups & SUVs make up much of what Des Moines-area shops and owners mail us. Domestic work like ford eec-v pcm clone / programming runs high-volume across Iowa — we see a steady stream out of Des Moines, Cedar Rapids, Davenport. Cross-region north — about 2 days each way.

Metros we serve in Iowa

Des MoinesCedar RapidsDavenportSioux City

Iowa at a glance

  • ~3.4M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Iowa has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original PCM's data transferred to a hardware-matched donor — true clone where the platform supports it
  • Or the donor bench-flashed with the correct calibration for your VIN when a full clone isn't supported
  • Straight answer BEFORE you ship: true clone, calibration clone, or replacement programming — mapped from your service number
  • Bench read + verify of both units before anything is written
  • Bench communication test with a stable, regulated power supply
  • Clear install notes — including whether a PATS parameter reset or key programming applies at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Iowa ↔ Arlington TX

USPS Priority routes north through the Central network; typically 2 days. Typical round-trip from Des Moines or anywhere in Iowa:

  1. Day 0

    You ship

    USPS Priority from IA, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Iowa FAQ

Common questions from customers shipping from Iowa.

How long does shipping take from Iowa to your Arlington TX workshop?
USPS Priority Mail from Des Moines, IA reaches our Arlington workshop in about 2 business days. USPS Priority routes north through the Central network; typically 2 days. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Iowa?
USPS Priority flat-rate from Iowa to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Iowa is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-region north — about 2 days each way.
Do you accept ford eec-v pcm clone / programming modules from Iowa?
Yes — we receive modules from Des Moines, Cedar Rapids, Davenport, Sioux City and the rest of Iowa regularly. With about 3.4 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Iowa.
Is there a ford eec-v pcm clone / programming shop in Des Moines I should use instead?
Most Des Moines shops don't keep the bench equipment for ford eec-v pcm clone / programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region north — about 2 days each way.
Does Iowa vehicle inspection or emissions testing affect this service?
Iowa has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Iowa and federal requirements.
How do I pick a compatible donor PCM?
Match the service number and hardware (catch) code on your original's label as closely as possible — same catch code is the gold standard. Original and replacement PCM must normally be hardware-compatible; a same-year same-engine truck is not automatically a match. Send us your label photo and the donor listing before you buy and we confirm it, free.
My original PCM is completely dead — can you still program a donor?
Yes — that becomes replacement programming: we bench-flash the donor with the correct factory calibration for your VIN and engine/transmission combination, and any PATS initialization is finished at the vehicle. You lose nothing except the original's stored adaptations, which relearn on their own.

Full details

See the complete Ford EEC-V PCM Clone / Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Iowa today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Des Moines: about a week.

(817) 678-3252