Auto Module Lab logoAUTO MODULELAB
FLORIDA · MAIL-IN SERVICE

GM BCM RPO Feature Programming in Florida

Ship your module from Miami or anywhere in Florida — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$450 flat Typical 24-Hour Turnaround ~2-3 day USPS from FL
Text Before You Buy

Why Florida customers mail in gm bcm rpo feature programming

Florida has roughly 18 million registered vehicles, and European luxury (BMW, Mercedes, Audi) make up much of what Miami-area shops and owners mail us. Domestic work like gm bcm rpo feature programming runs high-volume across Florida — we see a steady stream out of Miami, Tampa, Orlando. Cross-region southeast — about 2-3 days each way.

Metros we serve in Florida

MiamiTampaOrlandoJacksonville

Florida at a glance

  • ~18M registered vehicles statewide
  • Most common: European luxury (BMW, Mercedes, Audi)
  • Florida has no state vehicle safety or emissions inspection program.

What you get

  • Every requested BCM feature reconfigured for your VIN in one tune
  • RPO options enabled where your hardware supports them — AU3, A31, UK3, T96, AU0 and more
  • Export/Canadian trucks reverted to US-spec headlamp/DRL behavior
  • Original factory coding preserved for everything you did not change
  • Typical 24-hour turnaround after the BCM is received
  • Return shipping your choice at checkout — standard, 2-day, or overnight
  • 6-month warranty on programming work

Shipping timeline — Florida ↔ Arlington TX

USPS Priority routes southeast through the Gulf network; usually 2-3 days to the peninsula. Typical round-trip from Miami or anywhere in Florida:

  1. Day 0

    You ship

    USPS Priority from FL, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Florida FAQ

Common questions from customers shipping from Florida.

How long does shipping take from Florida to your Arlington TX workshop?
USPS Priority Mail from Miami, FL reaches our Arlington workshop in about 2-3 business days. USPS Priority routes southeast through the Gulf network; usually 2-3 days to the peninsula. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Florida?
USPS Priority flat-rate from Florida to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Florida is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region southeast — about 2-3 days each way.
Do you accept gm bcm rpo feature programming modules from Florida?
Yes — we receive modules from Miami, Tampa, Orlando, Jacksonville and the rest of Florida regularly. With about 18 million registered vehicles statewide, European luxury (BMW, Mercedes, Audi) are the bulk of what we see from Florida.
Is there a gm bcm rpo feature programming shop in Miami I should use instead?
Most Miami shops don't keep the bench equipment for gm bcm rpo feature programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region southeast — about 2-3 days each way.
Does Florida vehicle inspection or emissions testing affect this service?
Florida has no state vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Florida and federal requirements.
Can you enable a feature if the parts are not installed?
No, and we will tell you so before you spend money. Programming enables an option the vehicle is already built to run; it cannot create hardware. No BCM tune will make locks cycle without actuators, windows move without motors, fog lamps light without lamps, or a fob work without a receiver. That is why we verify by VIN and RPO sticker up front.
Is this the same as your GM BCM clone service?
No — they solve opposite problems. This page ENABLES factory options on a BCM that works. The GM BCM Standalone Clone service COPIES a failed BCM to a matching donor, carrying your VIN, true mileage, theft-deterrent data and existing coding across. If your module is dead you want the clone; if the module is fine but the option is switched off you want this. Send your VIN and symptoms and we will tell you which.

Full details

See the complete GM BCM RPO Feature Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Florida today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Miami: about a week.

(817) 678-3252