Auto Module Lab logoAUTO MODULELAB
INDIANA · MAIL-IN SERVICE

GM BCM RPO Feature Programming in Indiana

Ship your module from Indianapolis or anywhere in Indiana — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$450 flat Typical 24-Hour Turnaround ~2 day USPS from IN
Text Before You Buy

Why Indiana customers mail in gm bcm rpo feature programming

Indiana has roughly 5.9 million registered vehicles, and trucks, SUVs & imports make up much of what Indianapolis-area shops and owners mail us. Domestic work like gm bcm rpo feature programming runs high-volume across Indiana — we see a steady stream out of Indianapolis, Fort Wayne, Evansville. Cross-region north — about 2 days each way.

Metros we serve in Indiana

IndianapolisFort WayneEvansvilleSouth Bend

Indiana at a glance

  • ~5.9M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Indiana requires emissions testing only in Lake and Porter counties near Chicago; the rest of the state is exempt.

What you get

  • Every requested BCM feature reconfigured for your VIN in one tune
  • RPO options enabled where your hardware supports them — AU3, A31, UK3, T96, AU0 and more
  • Export/Canadian trucks reverted to US-spec headlamp/DRL behavior
  • Original factory coding preserved for everything you did not change
  • Typical 24-hour turnaround after the BCM is received
  • Return shipping your choice at checkout — standard, 2-day, or overnight
  • 6-month warranty on programming work

Shipping timeline — Indiana ↔ Arlington TX

USPS Priority routes northeast through the Central network; typically 2 days. Typical round-trip from Indianapolis or anywhere in Indiana:

  1. Day 0

    You ship

    USPS Priority from IN, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Indiana FAQ

Common questions from customers shipping from Indiana.

How long does shipping take from Indiana to your Arlington TX workshop?
USPS Priority Mail from Indianapolis, IN reaches our Arlington workshop in about 2 business days. USPS Priority routes northeast through the Central network; typically 2 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Indiana?
USPS Priority flat-rate from Indiana to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Indiana is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region north — about 2 days each way.
Do you accept gm bcm rpo feature programming modules from Indiana?
Yes — we receive modules from Indianapolis, Fort Wayne, Evansville, South Bend and the rest of Indiana regularly. With about 5.9 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Indiana.
Is there a gm bcm rpo feature programming shop in Indianapolis I should use instead?
Most Indianapolis shops don't keep the bench equipment for gm bcm rpo feature programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region north — about 2 days each way.
Does Indiana vehicle inspection or emissions testing affect this service?
Indiana requires emissions testing only in Lake and Porter counties near Chicago; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Indiana and federal requirements.
Can you enable a feature if the parts are not installed?
No, and we will tell you so before you spend money. Programming enables an option the vehicle is already built to run; it cannot create hardware. No BCM tune will make locks cycle without actuators, windows move without motors, fog lamps light without lamps, or a fob work without a receiver. That is why we verify by VIN and RPO sticker up front.
Is this the same as your GM BCM clone service?
No — they solve opposite problems. This page ENABLES factory options on a BCM that works. The GM BCM Standalone Clone service COPIES a failed BCM to a matching donor, carrying your VIN, true mileage, theft-deterrent data and existing coding across. If your module is dead you want the clone; if the module is fine but the option is switched off you want this. Send your VIN and symptoms and we will tell you which.

Full details

See the complete GM BCM RPO Feature Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Indiana today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Indianapolis: about a week.

(817) 678-3252