Auto Module Lab logoAUTO MODULELAB
GEORGIA · MAIL-IN SERVICE

TCM / Transmission Programming in Georgia

Ship your module from Atlanta or anywhere in Georgia — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from GA
Text Before You Buy

Why Georgia customers mail in tcm / transmission programming

Georgia has roughly 8.4 million registered vehicles, and trucks, SUVs & imports make up much of what Atlanta-area shops and owners mail us. TCM / Transmission Programming is a bench job most Atlanta shops don't keep equipment for, so owners and trade shops across Georgia ship it to a specialist. Cross-region southeast — about 2 days each way.

Metros we serve in Georgia

AtlantaAugustaSavannahColumbus

Georgia at a glance

  • ~8.4M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Georgia requires an annual emissions inspection in the 13 metro-Atlanta counties; the rest of the state is exempt.

What you get

  • Your original TCM data cloned onto the donor, or a used TCM programmed to match your vehicle, where supported
  • Calibration and stored adaptation carried over on a clone, where readable
  • TCM prepared so it communicates and matches after install
  • Bench read + verify before any changes are written
  • Bench communication tested with a stable, regulated power supply
  • Clear instructions on the at-the-car shift-adaptation drive cycle to finish
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Georgia ↔ Arlington TX

USPS Priority routes east through the Atlanta distribution hub; typically 2 days. Typical round-trip from Atlanta or anywhere in Georgia:

  1. Day 0

    You ship

    USPS Priority from GA, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Georgia FAQ

Common questions from customers shipping from Georgia.

How long does shipping take from Georgia to your Arlington TX workshop?
USPS Priority Mail from Atlanta, GA reaches our Arlington workshop in about 2 business days. USPS Priority routes east through the Atlanta distribution hub; typically 2 days. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Georgia?
USPS Priority flat-rate from Georgia to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Georgia is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-region southeast — about 2 days each way.
Do you accept tcm / transmission programming modules from Georgia?
Yes — we receive modules from Atlanta, Augusta, Savannah, Columbus and the rest of Georgia regularly. With about 8.4 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Georgia.
Is there a tcm / transmission programming shop in Atlanta I should use instead?
Most Atlanta shops don't keep the bench equipment for tcm / transmission programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region southeast — about 2 days each way.
Does Georgia vehicle inspection or emissions testing affect this service?
Georgia requires an annual emissions inspection in the 13 metro-Atlanta counties; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Georgia and federal requirements.
Will this fix a slipping or worn transmission?
No. Programming cannot repair worn clutches, bands, a failed torque converter, valve-body faults, or internal mechanical wear. Those must be repaired separately. TCM programming only matches and prepares the control module.
What do I need to send if I'm cloning?
Send both your original TCM and the donor TCM, along with your VIN, the module part number off the label, and a note that you want a clone. If you're programming a used TCM instead, send the used unit and your vehicle details.

Full details

See the complete TCM / Transmission Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Georgia today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Atlanta: about a week.

(817) 678-3252