Auto Module Lab logoAUTO MODULELAB
IOWA · MAIL-IN SERVICE

TCM / Transmission Programming in Iowa

Ship your module from Des Moines or anywhere in Iowa — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from IA
Text Before You Buy

Why Iowa customers mail in tcm / transmission programming

Iowa has roughly 3.4 million registered vehicles, and full-size pickups & SUVs make up much of what Des Moines-area shops and owners mail us. TCM / Transmission Programming is a bench job most Des Moines shops don't keep equipment for, so owners and trade shops across Iowa ship it to a specialist. Cross-region north — about 2 days each way.

Metros we serve in Iowa

Des MoinesCedar RapidsDavenportSioux City

Iowa at a glance

  • ~3.4M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Iowa has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original TCM data cloned onto the donor, or a used TCM programmed to match your vehicle, where supported
  • Calibration and stored adaptation carried over on a clone, where readable
  • TCM prepared so it communicates and matches after install
  • Bench read + verify before any changes are written
  • Bench communication tested with a stable, regulated power supply
  • Clear instructions on the at-the-car shift-adaptation drive cycle to finish
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Iowa ↔ Arlington TX

USPS Priority routes north through the Central network; typically 2 days. Typical round-trip from Des Moines or anywhere in Iowa:

  1. Day 0

    You ship

    USPS Priority from IA, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Iowa FAQ

Common questions from customers shipping from Iowa.

How long does shipping take from Iowa to your Arlington TX workshop?
USPS Priority Mail from Des Moines, IA reaches our Arlington workshop in about 2 business days. USPS Priority routes north through the Central network; typically 2 days. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Iowa?
USPS Priority flat-rate from Iowa to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Iowa is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-region north — about 2 days each way.
Do you accept tcm / transmission programming modules from Iowa?
Yes — we receive modules from Des Moines, Cedar Rapids, Davenport, Sioux City and the rest of Iowa regularly. With about 3.4 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Iowa.
Is there a tcm / transmission programming shop in Des Moines I should use instead?
Most Des Moines shops don't keep the bench equipment for tcm / transmission programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region north — about 2 days each way.
Does Iowa vehicle inspection or emissions testing affect this service?
Iowa has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Iowa and federal requirements.
Will this fix a slipping or worn transmission?
No. Programming cannot repair worn clutches, bands, a failed torque converter, valve-body faults, or internal mechanical wear. Those must be repaired separately. TCM programming only matches and prepares the control module.
What do I need to send if I'm cloning?
Send both your original TCM and the donor TCM, along with your VIN, the module part number off the label, and a note that you want a clone. If you're programming a used TCM instead, send the used unit and your vehicle details.

Full details

See the complete TCM / Transmission Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Iowa today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Des Moines: about a week.

(817) 678-3252