Auto Module Lab logoAUTO MODULELAB
MISSOURI · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in Missouri

Ship your module from Kansas City or anywhere in Missouri — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~1-2 day USPS from MO
Text Before You Buy

Why Missouri customers mail in chrysler / dodge / jeep bcm clone

Missouri has roughly 5 million registered vehicles, and trucks, SUVs & imports make up much of what Kansas City-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across Missouri — we see a steady stream out of Kansas City, St. Louis, Springfield. Regional north — 1-2 days each way.

Metros we serve in Missouri

Kansas CitySt. LouisSpringfieldColumbia

Missouri at a glance

  • ~5M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Missouri requires a safety inspection for many vehicles and emissions testing in the St. Louis metro area.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Missouri ↔ Arlington TX

USPS Priority is a short run north from the North Texas network; often 1-2 days. Typical round-trip from Kansas City or anywhere in Missouri:

  1. Day 0

    You ship

    USPS Priority from MO, ~$10

  2. Day 1-2

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Missouri FAQ

Common questions from customers shipping from Missouri.

How long does shipping take from Missouri to your Arlington TX workshop?
USPS Priority Mail from Kansas City, MO reaches our Arlington workshop in about 1-2 business days. USPS Priority is a short run north from the North Texas network; often 1-2 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Missouri?
USPS Priority flat-rate from Missouri to Arlington TX runs about $10. The customer pays shipping to us; return shipping back to Missouri is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Regional north — 1-2 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from Missouri?
Yes — we receive modules from Kansas City, St. Louis, Springfield, Columbia and the rest of Missouri regularly. With about 5 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Missouri.
Is there a chrysler / dodge / jeep bcm clone shop in Kansas City I should use instead?
Most Kansas City shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Regional north — 1-2 days each way.
Does Missouri vehicle inspection or emissions testing affect this service?
Missouri requires a safety inspection for many vehicles and emissions testing in the St. Louis metro area. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Missouri and federal requirements.
Will this fix my electrical gremlins for sure?
It fixes the ones caused by a failed or unconfigured body control module. It cannot repair harness damage, corroded grounds, bad connectors, blown fuses, or a failed TIPM — those mimic BCM failure convincingly and must be diagnosed on the vehicle. Cloning restores the module; it does not repair the wiring around it.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies both part numbers by VIN and label, you ship the original and the donor to Auto Module Lab. We back up, read, and clone on the bench, test communication, and ship both back with tracking — return speed your choice at checkout: Standard $29.95, UPS 2-Day $54.95, or UPS overnight $94.95. This is a mail-in bench service only.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Missouri today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Kansas City: about a week.

(817) 678-3252