Auto Module Lab logoAUTO MODULELAB
NEW HAMPSHIRE · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in New Hampshire

Ship your module from Manchester or anywhere in New Hampshire — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from NH
Text Before You Buy

Why New Hampshire customers mail in chrysler / dodge / jeep bcm clone

New Hampshire has roughly 1.3 million registered vehicles, and trucks & 4x4 SUVs make up much of what Manchester-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across New Hampshire — we see a steady stream out of Manchester, Nashua, Concord. Cross-country northeast — about 3 days each way.

Metros we serve in New Hampshire

ManchesterNashuaConcordDover

New Hampshire at a glance

  • ~1.3M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • New Hampshire requires an annual safety inspection statewide, with OBD-II emissions testing for newer model years.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — New Hampshire ↔ Arlington TX

USPS Priority routes northeast through the New England network; typically 3 days. Typical round-trip from Manchester or anywhere in New Hampshire:

  1. Day 0

    You ship

    USPS Priority from NH, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

New Hampshire FAQ

Common questions from customers shipping from New Hampshire.

How long does shipping take from New Hampshire to your Arlington TX workshop?
USPS Priority Mail from Manchester, NH reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the New England network; typically 3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from New Hampshire?
USPS Priority flat-rate from New Hampshire to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to New Hampshire is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from New Hampshire?
Yes — we receive modules from Manchester, Nashua, Concord, Dover and the rest of New Hampshire regularly. With about 1.3 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from New Hampshire.
Is there a chrysler / dodge / jeep bcm clone shop in Manchester I should use instead?
Most Manchester shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does New Hampshire vehicle inspection or emissions testing affect this service?
New Hampshire requires an annual safety inspection statewide, with OBD-II emissions testing for newer model years. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all New Hampshire and federal requirements.
Why doesn't a used BCM work when I just plug it in?
The BCM stores your VIN and your build's option content, and the rest of the vehicle network expects those values to match. A donor module is still describing the car it came out of, so the vehicle typically ignores it — dead dash, no crank, or a batch of unrelated electrical faults. Cloning copies your original's configuration, coding, and VIN across so the donor arrives already matching your vehicle.
Is a BCM the same thing as a TIPM?
No, and this is the single most common mix-up on these vehicles. The TIPM is the power distribution center — relays and high-current circuits. The BCM is the logic module that controls body functions and talks on the network. They fail differently and are serviced differently: if your problem is the power distribution unit, our TIPM service is the right listing, not this one.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from New Hampshire today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Manchester: about a week.

(817) 678-3252