Auto Module Lab logoAUTO MODULELAB
NEW JERSEY · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in New Jersey

Ship your module from Newark or anywhere in New Jersey — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from NJ
Text Before You Buy

Why New Jersey customers mail in chrysler / dodge / jeep bcm clone

New Jersey has roughly 6.4 million registered vehicles, and European luxury (BMW, Mercedes, Audi) make up much of what Newark-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across New Jersey — we see a steady stream out of Newark, Jersey City, Paterson. Cross-country northeast — about 3 days each way.

Metros we serve in New Jersey

NewarkJersey CityPatersonTrenton

New Jersey at a glance

  • ~6.4M registered vehicles statewide
  • Most common: European luxury (BMW, Mercedes, Audi)
  • New Jersey requires a biennial OBD-II emissions inspection at state facilities; the safety inspection requirement was discontinued.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — New Jersey ↔ Arlington TX

USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. Typical round-trip from Newark or anywhere in New Jersey:

  1. Day 0

    You ship

    USPS Priority from NJ, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

New Jersey FAQ

Common questions from customers shipping from New Jersey.

How long does shipping take from New Jersey to your Arlington TX workshop?
USPS Priority Mail from Newark, NJ reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from New Jersey?
USPS Priority flat-rate from New Jersey to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to New Jersey is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from New Jersey?
Yes — we receive modules from Newark, Jersey City, Paterson, Trenton and the rest of New Jersey regularly. With about 6.4 million registered vehicles statewide, European luxury (BMW, Mercedes, Audi) are the bulk of what we see from New Jersey.
Is there a chrysler / dodge / jeep bcm clone shop in Newark I should use instead?
Most Newark shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does New Jersey vehicle inspection or emissions testing affect this service?
New Jersey requires a biennial OBD-II emissions inspection at state facilities; the safety inspection requirement was discontinued. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all New Jersey and federal requirements.
Is a BCM the same thing as a TIPM?
No, and this is the single most common mix-up on these vehicles. The TIPM is the power distribution center — relays and high-current circuits. The BCM is the logic module that controls body functions and talks on the network. They fail differently and are serviced differently: if your problem is the power distribution unit, our TIPM service is the right listing, not this one.
Do I still need a dealer wiTECH session afterwards?
On supported applications, no — that is the point of cloning. The donor comes back carrying your original's configuration, coding, and VIN, so it installs plug-and-play. Some newer vehicles carry security-gateway (SGW) considerations for at-the-car steps, and where that applies to your VIN we tell you before you ship rather than after you have paid.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from New Jersey today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Newark: about a week.

(817) 678-3252