Auto Module Lab logoAUTO MODULELAB
NEW MEXICO · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in New Mexico

Ship your module from Albuquerque or anywhere in New Mexico — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~1-2 day USPS from NM
Text Before You Buy

Why New Mexico customers mail in chrysler / dodge / jeep bcm clone

New Mexico has roughly 1.8 million registered vehicles, and full-size pickups & SUVs make up much of what Albuquerque-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across New Mexico — we see a steady stream out of Albuquerque, Las Cruces, Rio Rancho. Neighboring state — 1-2 days each way.

Metros we serve in New Mexico

AlbuquerqueLas CrucesRio RanchoSanta Fe

New Mexico at a glance

  • ~1.8M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • New Mexico requires emissions testing only in Bernalillo County (Albuquerque area); the rest of the state is exempt.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — New Mexico ↔ Arlington TX

USPS Priority runs west from the North Texas network; often 1-2 days to the eastern part of the state. Typical round-trip from Albuquerque or anywhere in New Mexico:

  1. Day 0

    You ship

    USPS Priority from NM, ~$10

  2. Day 1-2

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

New Mexico FAQ

Common questions from customers shipping from New Mexico.

How long does shipping take from New Mexico to your Arlington TX workshop?
USPS Priority Mail from Albuquerque, NM reaches our Arlington workshop in about 1-2 business days. USPS Priority runs west from the North Texas network; often 1-2 days to the eastern part of the state. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from New Mexico?
USPS Priority flat-rate from New Mexico to Arlington TX runs about $10. The customer pays shipping to us; return shipping back to New Mexico is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Neighboring state — 1-2 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from New Mexico?
Yes — we receive modules from Albuquerque, Las Cruces, Rio Rancho, Santa Fe and the rest of New Mexico regularly. With about 1.8 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from New Mexico.
Is there a chrysler / dodge / jeep bcm clone shop in Albuquerque I should use instead?
Most Albuquerque shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Neighboring state — 1-2 days each way.
Does New Mexico vehicle inspection or emissions testing affect this service?
New Mexico requires emissions testing only in Bernalillo County (Albuquerque area); the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all New Mexico and federal requirements.
My BCM is completely dead — can you still clone it?
If the module will not power up or respond, there is nothing to read, so a clone is not possible. In that situation the usual path is a donor programmed to your vehicle by other means, or a dealer configuration session. Send us your VIN and symptoms first and we will tell you honestly whether your original is likely readable before you ship anything.
Will this fix my electrical gremlins for sure?
It fixes the ones caused by a failed or unconfigured body control module. It cannot repair harness damage, corroded grounds, bad connectors, blown fuses, or a failed TIPM — those mimic BCM failure convincingly and must be diagnosed on the vehicle. Cloning restores the module; it does not repair the wiring around it.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from New Mexico today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Albuquerque: about a week.

(817) 678-3252