Auto Module Lab logoAUTO MODULELAB
PENNSYLVANIA · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in Pennsylvania

Ship your module from Philadelphia or anywhere in Pennsylvania — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from PA
Text Before You Buy

Why Pennsylvania customers mail in chrysler / dodge / jeep bcm clone

Pennsylvania has roughly 10 million registered vehicles, and trucks, SUVs & imports make up much of what Philadelphia-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across Pennsylvania — we see a steady stream out of Philadelphia, Pittsburgh, Allentown. Cross-country northeast — about 3 days each way.

Metros we serve in Pennsylvania

PhiladelphiaPittsburghAllentownHarrisburg

Pennsylvania at a glance

  • ~10M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Pennsylvania requires an annual safety inspection statewide, with emissions testing in 25 of the more populous counties.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Pennsylvania ↔ Arlington TX

USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. Typical round-trip from Philadelphia or anywhere in Pennsylvania:

  1. Day 0

    You ship

    USPS Priority from PA, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Pennsylvania FAQ

Common questions from customers shipping from Pennsylvania.

How long does shipping take from Pennsylvania to your Arlington TX workshop?
USPS Priority Mail from Philadelphia, PA reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Pennsylvania?
USPS Priority flat-rate from Pennsylvania to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Pennsylvania is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from Pennsylvania?
Yes — we receive modules from Philadelphia, Pittsburgh, Allentown, Harrisburg and the rest of Pennsylvania regularly. With about 10 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Pennsylvania.
Is there a chrysler / dodge / jeep bcm clone shop in Philadelphia I should use instead?
Most Philadelphia shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does Pennsylvania vehicle inspection or emissions testing affect this service?
Pennsylvania requires an annual safety inspection statewide, with emissions testing in 25 of the more populous counties. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Pennsylvania and federal requirements.
My BCM is completely dead — can you still clone it?
If the module will not power up or respond, there is nothing to read, so a clone is not possible. In that situation the usual path is a donor programmed to your vehicle by other means, or a dealer configuration session. Send us your VIN and symptoms first and we will tell you honestly whether your original is likely readable before you ship anything.
Will this fix my electrical gremlins for sure?
It fixes the ones caused by a failed or unconfigured body control module. It cannot repair harness damage, corroded grounds, bad connectors, blown fuses, or a failed TIPM — those mimic BCM failure convincingly and must be diagnosed on the vehicle. Cloning restores the module; it does not repair the wiring around it.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Pennsylvania today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Philadelphia: about a week.

(817) 678-3252