Auto Module Lab logoAUTO MODULELAB
TEXAS · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in Texas

Ship your module from Houston or anywhere in Texas — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~1 day USPS from TX
Text Before You Buy

Why Texas customers mail in chrysler / dodge / jeep bcm clone

Texas has roughly 22.8 million registered vehicles, and full-size pickups & SUVs make up much of what Houston-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across Texas — we see a steady stream out of Houston, Dallas-Fort Worth, San Antonio. Same-state — fastest possible round-trip.

Metros we serve in Texas

HoustonDallas-Fort WorthSan AntonioAustin

Texas at a glance

  • ~22.8M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Texas ended its annual safety inspection for most non-commercial vehicles in 2025; emissions testing still applies in designated metro counties. Confirm current requirements with the Texas DMV.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Texas ↔ Arlington TX

USPS Priority routes through the North Texas distribution network; 1 day from most of the state. Typical round-trip from Houston or anywhere in Texas:

  1. Day 0

    You ship

    USPS Priority from TX, ~$9

  2. Day 1

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 3

    Back to you

    Return speed you chose at checkout

Texas FAQ

Common questions from customers shipping from Texas.

How long does shipping take from Texas to your Arlington TX workshop?
USPS Priority Mail from Houston, TX reaches our Arlington workshop in about 1 business day. USPS Priority routes through the North Texas distribution network; 1 day from most of the state. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Texas?
USPS Priority flat-rate from Texas to Arlington TX runs about $9. The customer pays shipping to us; return shipping back to Texas is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Same-state — fastest possible round-trip.
Do you accept chrysler / dodge / jeep bcm clone modules from Texas?
Yes — we receive modules from Houston, Dallas-Fort Worth, San Antonio, Austin and the rest of Texas regularly. With about 22.8 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Texas.
Is there a chrysler / dodge / jeep bcm clone shop in Houston I should use instead?
Most Houston shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Same-state — fastest possible round-trip.
Does Texas vehicle inspection or emissions testing affect this service?
Texas ended its annual safety inspection for most non-commercial vehicles in 2025; emissions testing still applies in designated metro counties. Confirm current requirements with the Texas DMV. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Texas and federal requirements.
Will this fix my electrical gremlins for sure?
It fixes the ones caused by a failed or unconfigured body control module. It cannot repair harness damage, corroded grounds, bad connectors, blown fuses, or a failed TIPM — those mimic BCM failure convincingly and must be diagnosed on the vehicle. Cloning restores the module; it does not repair the wiring around it.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies both part numbers by VIN and label, you ship the original and the donor to Auto Module Lab. We back up, read, and clone on the bench, test communication, and ship both back with tracking — return speed your choice at checkout: Standard $29.95, UPS 2-Day $54.95, or UPS overnight $94.95. This is a mail-in bench service only.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Texas today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Houston: about a week.

(817) 678-3252