Auto Module Lab logoAUTO MODULELAB
UTAH · MAIL-IN SERVICE

Chrysler / Dodge / Jeep BCM Clone in Utah

Ship your module from Salt Lake City or anywhere in Utah — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from UT
Text Before You Buy

Why Utah customers mail in chrysler / dodge / jeep bcm clone

Utah has roughly 2.7 million registered vehicles, and trucks & 4x4 SUVs make up much of what Salt Lake City-area shops and owners mail us. Domestic work like chrysler / dodge / jeep bcm clone runs high-volume across Utah — we see a steady stream out of Salt Lake City, West Valley City, Provo. Cross-country northwest — about 2-3 days each way.

Metros we serve in Utah

Salt Lake CityWest Valley CityProvoOgden

Utah at a glance

  • ~2.7M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt.

What you get

  • Your original BCM's configuration, coding, and VIN cloned onto a part-number-matched donor
  • A replacement that installs plug-and-play without a dealer wiTECH configuration session, where supported
  • Donor part-number compatibility verified by VIN and module label before you ship anything
  • Bench read + full backup of the original data before a single byte is written
  • Bench communication test with a stable, regulated power supply before the module ships back
  • Clear install notes — including whether any security-gateway or at-the-car step applies on your vehicle
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Utah ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Salt Lake City or anywhere in Utah:

  1. Day 0

    You ship

    USPS Priority from UT, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Utah FAQ

Common questions from customers shipping from Utah.

How long does shipping take from Utah to your Arlington TX workshop?
USPS Priority Mail from Salt Lake City, UT reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Utah?
USPS Priority flat-rate from Utah to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Utah is selected at checkout — $29.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 2-3 days each way.
Do you accept chrysler / dodge / jeep bcm clone modules from Utah?
Yes — we receive modules from Salt Lake City, West Valley City, Provo, Ogden and the rest of Utah regularly. With about 2.7 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Utah.
Is there a chrysler / dodge / jeep bcm clone shop in Salt Lake City I should use instead?
Most Salt Lake City shops don't keep the bench equipment for chrysler / dodge / jeep bcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 2-3 days each way.
Does Utah vehicle inspection or emissions testing affect this service?
Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Utah and federal requirements.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies both part numbers by VIN and label, you ship the original and the donor to Auto Module Lab. We back up, read, and clone on the bench, test communication, and ship both back with tracking — return speed your choice at checkout: Standard $29.95, UPS 2-Day $54.95, or UPS overnight $94.95. This is a mail-in bench service only.
Which vehicles does this BCM cloning service cover?
Roughly 2011–2023 Chrysler group Body Control Modules: Ram 1500 and heavy duty, Dodge Charger, Challenger, Durango and Journey, Chrysler 300 and Pacifica, Jeep Grand Cherokee WK2, Wrangler JK and JL, Compass and Renegade. It also covers the separate 2013–2018 Dodge Dart, Chrysler 200, and Jeep Cherokee KL fuse-box BCM, where the module and the fuse block are a single assembly. Coverage is decided by the part number on the label, so send us your VIN and a photo and we will confirm before you ship.

Full details

See the complete Chrysler / Dodge / Jeep BCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Utah today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Salt Lake City: about a week.

(817) 678-3252