
Chrysler / Dodge / Jeep / Ram TIPM VIN Programming — Remote, Used or New TIPM
Used TIPM swap and the truck won't take it? We write your VIN to the TIPM, used or new, over a remote session — nothing to ship, $199.

Chrysler, Dodge, Jeep & Ram with a TIPM, roughly 2007-2014, including Ram 3500 / 4500 / 5500 Cab & Chassis. Every job is checked by part number before you pay.
How It Works
Three simple steps — you keep the car. We connect remotely through a J2534 interface at the car.

Pay & Schedule
Click "Order Now", pay securely online. We confirm compatibility and book your remote session time by text/email.

Plug In & Connect
At the car, plug the J2534 interface into the OBD port and a Windows laptop, power the vehicle with a battery support charger, and open the remote-connection app we send you so we can connect.

We Do It Live
We run the programming software from our end while you watch. Most sessions finish the same day — no shipping, no downtime.
What You Get
- Your VIN written to the TIPM, new or used, while it stays in the vehicle
- TIPM configuration matched to your vehicle
- A live remote session with a Chrysler programming tech
- A check of your part number before you pay, so you don't pay for a mismatch
- Nothing shipped in or out. If you borrow the RLink, it ships to you with a prepaid return label
- Flat $199
Compatibility
Confirm your part matches one of the variants below before ordering. Not sure? Text us a photo and we'll verify.
The part number is on the label of the TIPM: 04 or 68, six digits and a two-letter suffix (for example 04692338AA). The long mixed code next to it (for example T7BQH…) is a serial number, not the part number.
Chrysler & Dodge
Jeep & Ram
- Jeep Wrangler JK / Grand Cherokee WK2
- Jeep Liberty / Patriot / Compass
- Ram 1500 / 2500 / 3500 (2009-2014)
- Ram 3500 / 4500 / 5500 Cab & Chassis (e.g. 04692338AA)
The TIPM in your vehicle
- A used TIPM from another vehicle
- A new or remanufactured TIPM
- Same part number as your original, or a supersession we confirm
- Part number is on the TIPM label: 04 or 68 + 6 digits + 2 letters
What you need at the car
- A J2534 interface: borrow our RLink X3 or use your own Chrysler-capable one
- A Windows laptop with internet
- A battery charger holding voltage for the whole session
- The vehicle and its keys
Will This Fix My Problem?
Honest answer: here's exactly what this service fixes — and what it doesn't.
Fixes:
- A used TIPM that won't accept your vehicle after install
- No crank or no start after a TIPM swap
- Fuel pump not running, or running nonstop, after a TIPM swap
- Wrong VIN, or a VIN mismatch code, on the TIPM after a swap
- A new TIPM that still needs your VIN and configuration
Won't fix:
- A TIPM with a burnt or failed board — that is our $499 bench repair
- A TIPM with a different part number from your original that isn't a confirmed supersession
- Wiring harness, ground, connector or fuel-pump relay faults
- PCM, BCM, SKIM or key programming (separate services)
Before you order
You diagnose, we restore the module.
We don't have your car and we don't diagnose it. Order once you or your mechanic have confirmed this module is the cause. If the work is completed and the car still has the same symptom because of another fault, the work is still done.
What the remote session does.
We restore and reconfigure the module over your J2534 connection while the car stays where it is. It isn't a promise that the car will start or run — wiring, keys and other modules are outside what we can test remotely.
Why the used TIPM you bought doesn't work
A used TIPM keeps the VIN of the vehicle it came from. The factory Restore Vehicle Configuration routine does not rewrite the VIN on a used module, which is why so many junkyard TIPMs fail in someone else's truck. We write your VIN to the module itself, over a remote session, with the TIPM still in your vehicle. If your board is damaged, the $499 bench repair fixes your original instead. If you have no TIPM yet, the $599 programmed TIPM arrives already set to your VIN.
Need the TIPM too? See the programmed TIPMHow the Remote Session Works
We confirm compatibility and the steps with you before the session.
This is a REMOTE service — nothing ships in or out. Text us your VIN and the part number on your TIPM before you order. After you pay, we book a time. At the car, plug the J2534 into the OBD port and into a Windows laptop with internet, and we write your VIN from our end. No J2534? Borrow our TOPDON RLink X3 at checkout: it ships to you with a prepaid return label, and the $200 deposit is refunded when it comes back within 30 days.
What you need for the session
- A J2534 interface on the OBD port: our RLink X3 (loaned at checkout) or your own Chrysler-capable one
- A Windows laptop with internet at the car
- A battery charger holding steady voltage for the whole session
- The TIPM installed in the vehicle, and the vehicle's keys
- Your VIN and the part number off the TIPM label, texted before you order
Remote — no shipping
You keep the car. Pay, then we schedule the remote session and walk you through it. Questions? Text us first to confirm your vehicle is a fit.
Need to perform this job remotely?
Get an Auto Module Lab Remote Programming Kit and have our technicians program supported vehicles from your shop — the car stays on your lift and nothing gets posted.
Buy the interface once — program with us anytime. Supported procedures vary by vehicle, module, OEM software and security requirements.
Frequently Asked
Still have a question? Text us — replies in minutes.
Can you really program a used TIPM remotely?
What do I need at the car?
How do I know my TIPM will work?
Where do I find the part number?
What if my TIPM is burnt or damaged?
Related Services
Other bench services for the same brand or use case.

GPEC2 / 2A / 3 / 4 / 4LM PCM Clone (Mail-In)
Replacing a failed GPEC2 / GPEC2A PCM? Mail in your original + the donor and we clone it — VIN, immo, and config carried over so it plugs in and runs.

TIPM Chrysler/Dodge/Jeep Repair
Bench repair for failed TIPM units — the known-failure-prone fuse box on 2007-2014 Ram, Jeep, Chrysler, Dodge.

GPEC2 / 2A / 3 / 4 / 4LM PCM Unlocking
Mail in your locked Chrysler / Dodge / Jeep / Ram GPEC2 or GPEC2A PCM and we unlock it so tuning software can read and write it.
Where we serve Chrysler TIPM — Remote VIN Programming
Remote means nationwide — we work on cars in all 50 states and DC from our Arlington, Texas lab, and nothing ships. See your state, metro, or specific vehicle:
Ready to book?
$199 flat, typical 24-hour turnaround. Pay now and we schedule the remote session — the car stays where it is and nothing ships.