Heavy-duty enquiries require individual acceptance. Module imagery is illustrative; send your actual label and connector photos.
Heavy-Duty Modules · Individual Acceptance

Ram 6.7L Cummins CM2450B ECM Replacement

Need a replacement for a failed Ram 6.7L Cummins CM2450B ECM? Send the VIN, module label and fault report for an application-specific sourcing and programming quote.

Quote only · from $1995Confirmed with your quoteShipping confirmed in quote
Ram 6.7L Cummins CM2450B ECM Replacement

Ram 6.7L Cummins CM2450B enquiries • 2019–2021 and 2022–2024 reviewed separately • VIN + exact ECM label required

Ram Cummins CM2450B ECM Replacement: the short answer

Auto Module Lab accepts Ram 6.7L Cummins CM2450B ECM replacement enquiries nationwide through its Arlington, Texas workshop. The reference starting price is $1,995; this is a quote-based sourcing service, not a stocked, guaranteed-fit exchange listing. Send the VIN, complete ECM label, diagnostic report and whether the original still communicates. We confirm donor availability, programming or data-transfer feasibility, any vehicle-side setup, core terms and warranty before accepting an order.

Compare all heavy-duty module services · Send the label and diagnostic report first. Acceptance and bench test coverage are confirmed for each unit.

Your service enquiry

  • VIN, application and original/donor label review before an order is accepted
  • A written replacement proposal identifying module condition: used, remanufactured or new, subject to availability
  • Separate confirmation of included programming, original-data transfer and any installation-shop setup
  • A total quote covering the module, approved work, shipping, tax, core arrangements, warranty and lead time
  • For an accepted order, the agreed communication/data checks and installation notes supplied with the replacement

Send the complete module label, VIN, engine serial number and diagnostic report. We confirm the application and available bench test coverage before accepting the unit.

Compatibility

Confirm your part matches one of the variants below before ordering. Not sure? Text us a photo and we'll verify.

CM2450B is not an interchange guarantee. Ram CM2450B, commercial CM2450A and CM2350-family controllers are not automatically substitutes. A matching connector, year range or VIN write alone does not establish compatibility or a complete clone.

Identify your application

  • Ram 2500 / 3500 pickup and 3500 / 4500 / 5500 chassis-cab enquiries, where the original ECM is confirmed as CM2450B
  • 2019–2021: exact part number, hardware revision, software and vehicle configuration reviewed before sourcing
  • 2022–2024: separate hardware, software and security review; earlier-year compatibility is not assumed
  • Engine serial number, transmission type and original/donor label photos help establish the correct replacement

Original ECM condition changes the proposal

  • Original available and readable: assess whether the required original data can be transferred to a compatible donor
  • Original available but not communicating: review diagnosis and recovery feasibility before promising a transfer
  • Original missing or unrecoverable: confirm an available factory programming and vehicle setup route first; acceptance is not guaranteed
  • Customer-supplied donor: send its complete label before buying programming or shipping either unit

Will This Fix My Problem?

Honest answer: here's exactly what this service fixes — and what it doesn't.

Fixes:

  • A diagnosed ECM failure for which replacement is the agreed repair path
  • An original ECM with damage that makes repair unsuitable
  • A replacement needed after a failed programming attempt, once recovery options have been reviewed
  • A shop needing a matched donor and a defined programming plan before installation

Won't fix:

  • Vehicle wiring, power, ground, network, sensor, injector or mechanical faults
  • An unidentified no-start or derate without diagnosis
  • Guaranteed full cloning, recovery of destroyed memory, or automatic plug-and-play installation on every variant
  • A universal 2019–2024 interchange or guaranteed acceptance of a customer-supplied donor
  • Tuning unlocks or emissions-system modifications

Before you order

  • Vehicle diagnosis comes first.

    You or your mechanic must confirm the fault before ordering. Bench work on a module cannot diagnose or correct vehicle wiring, sensors, mechanical faults or other controllers.

  • Confirm the exact replacement or repair route.

    Donor compatibility, required original data and any programming or vehicle-side setup must be reviewed for your application. A readable calibration or a matching VIN alone does not establish a complete clone or plug-and-play installation. Tell us about any prior work.

  • Wait for written acceptance.

    The quote confirms the agreed work, fees, shipping, any core terms, warranty and timing. Do not pay or ship until those details are accepted. Completing module work does not guarantee the vehicle will run if another fault remains.

Our bench process

From the initial enquiry to the agreed work and verification.

  1. 1

    Send the identification and diagnosis

    Send the VIN, year, model, engine, transmission, complete module-label photos and scan report. Include power/ground and communication checks, any prior flashing or tuning history, and whether the original ECM is available and readable.

  2. 2

    Review the replacement options

    We check the application and available donor options. Any recovery, data transfer, factory programming or vehicle-side setup is specified separately. Do not buy or ship a donor based only on its connector or advertised year range.

  3. 3

    Approve the complete written quote

    Confirm the module condition, stock availability, included work, diagnostic charges, shipping, tax, core deposit and return deadline, warranty and lead time. Send only the items requested after acceptance.

  4. 4

    Install and verify on the truck

    The installing shop completes any agreed programming or relearns and verifies starting, communication, configuration and operation. Bench checks do not replace vehicle testing, and external faults must be corrected before connecting a replacement.

Repair vs used vs replacement

Compare the available options and what each requires.

Repair the original· our service
What must be confirmed
Hardware fault, repairability and test coverage; quoted separately
Transfer original data to a donor
What must be confirmed
Readable required data, supported procedure and compatible hardware; full cloning is not assumed
Supply a replacement ECM
What must be confirmed
Condition, availability, application match, programming, vehicle setup and core terms

The $1,995 reference is not a fixed all-in price. The written quote defines the supplied module and included work. The $250 Bosch Mopar clone and $350 general recovery listings do not automatically cover CM2450B.

Have a 2022–2024 truck or an unreadable original?

Tell us that first. A calibration read or VIN transfer is not proof that all data needed for a replacement has been recovered. We must confirm the exact controller, available read/write support and any vehicle-side commissioning before accepting the job. Keep the original ECM and existing backups until the replacement is installed and verified.

Shipping after approval

Wait for written acceptance and shipping instructions. We may need the original ECM, an approved donor or additional information depending on the agreed route. Do not send keys or other security modules unless specifically requested. Core return arrangements are part of the quote.

  • Only the original ECM and/or donor specifically requested in your written acceptance
  • The approval reference, contact details, VIN, module label details and diagnostic report
  • Proof of ownership when security-linked work is required

Frequently Asked

Still have a question? Text us with your module label and diagnostic report.

How much is a CM2450B replacement ECM?
The reference starting price is $1,995. The actual total depends on the matched module, its condition and availability, programming, any data recovery, shipping, tax and core terms. We confirm everything in a written quote before payment; this page has no automatic checkout.
Do you cover both 2019–2021 and 2022–2024 Ram trucks?
We accept enquiries for both groups and review them separately. A year range alone does not prove fitment or programming support. Send the VIN and complete original ECM label; acceptance depends on the exact hardware, software and available replacement route.
Is this guaranteed plug-and-play cloning?
No. Full cloning requires all data needed for the receiving vehicle, a compatible donor and a verified procedure for that exact application. A calibration backup or successful VIN write alone is not proof of a complete clone. Any remaining installation or programming steps are stated in the quote.
What if my original ECM is dead or missing?
Tell us before shipping or buying a donor. If the original is available, recovery feasibility can be assessed separately. If it is missing or its required data cannot be recovered, we must confirm an available factory programming and vehicle setup route. Some cases cannot be accepted.
Can I send my own donor ECM?
Send clear photos of both labels first. We review part numbers, hardware, application and programming requirements before accepting a donor. A used module with a matching connector is not automatically compatible.
Are core deposits, warranty and shipping included?
The written quote specifies whether a core is required, any deposit, return deadline, acceptable core condition, refund terms, shipping costs and warranty coverage. No single core or warranty policy is promised for every sourced replacement.
Does the $250 Mopar diesel clone or $350 recovery price apply?
Not automatically. The Mopar diesel clone listing covers Bosch Liberty CRD and EcoDiesel modules, not Cummins CM2450B. CM2450B recovery, cloning feasibility and replacement require their own application review and written scope.
Is this a tuning unlock service?
No. Replacement, original-data transfer, failed-flash recovery and tuning unlock are different operations. This enquiry is for a correctly configured replacement ECM; tuning unlocks and emissions modifications are not included.

Related Services

Other bench services for the same brand or use case.

Ready for a quote?

From $1995. Send your module label and diagnostic report. Wait for written acceptance and shipping instructions before sending a module.