Auto Module Lab logoAUTO MODULELAB
MONTANA · MAIL-IN SERVICE

Ford EEC-V PCM Clone / Programming in Montana

Ship your module from Billings or anywhere in Montana — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from MT
Text Before You Buy

Why Montana customers mail in ford eec-v pcm clone / programming

Montana has roughly 1.7 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Billings-area shops and owners mail us. Domestic work like ford eec-v pcm clone / programming runs high-volume across Montana — we see a steady stream out of Billings, Missoula, Great Falls. Cross-country northwest — about 3 days each way.

Metros we serve in Montana

BillingsMissoulaGreat FallsBozeman

Montana at a glance

  • ~1.7M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Montana has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original PCM's data transferred to a hardware-matched donor — true clone where the platform supports it
  • Or the donor bench-flashed with the correct calibration for your VIN when a full clone isn't supported
  • Straight answer BEFORE you ship: true clone, calibration clone, or replacement programming — mapped from your service number
  • Bench read + verify of both units before anything is written
  • Bench communication test with a stable, regulated power supply
  • Clear install notes — including whether a PATS parameter reset or key programming applies at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Montana ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Billings or anywhere in Montana:

  1. Day 0

    You ship

    USPS Priority from MT, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Montana FAQ

Common questions from customers shipping from Montana.

How long does shipping take from Montana to your Arlington TX workshop?
USPS Priority Mail from Billings, MT reaches our Arlington workshop in about 3 business days. USPS Priority routes northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Montana?
USPS Priority flat-rate from Montana to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Montana is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept ford eec-v pcm clone / programming modules from Montana?
Yes — we receive modules from Billings, Missoula, Great Falls, Bozeman and the rest of Montana regularly. With about 1.7 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Montana.
Is there a ford eec-v pcm clone / programming shop in Billings I should use instead?
Most Billings shops don't keep the bench equipment for ford eec-v pcm clone / programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Montana vehicle inspection or emissions testing affect this service?
Montana has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Montana and federal requirements.
Which Fords does this service cover?
The advertised range follows the well-documented EEC-V support map: 1997–2004 F-150, 1997–2004 Ranger, 1997–2000 Explorer 4.0L (5.0L 1998–1999), 2001–2004 Expedition, 1996–2004 Mustang V6 and GT (Cobra 1996–1998 and 2003–2004, Cobra R 2000, Mach 1 2003–2004), 1996–2004 Crown Victoria, 1996 Bronco, 1997 Aerostar, and 1996–1997 Thunderbird. Mercury Grand Marquis and Mountaineer, Lincoln Town Car and Navigator, E-Series vans, the 1999–2003 7.3L Power Stroke, and some Taurus/Sable/Windstar applications are handled case-by-case after we verify your specific PCM.
What is an EEC-V PCM and how do I know I have one?
EEC-V is Ford's fifth-generation electronic engine control architecture, used across most of the lineup from roughly 1996 to 2004. The quickest visual clue is the 104-pin main connector on the PCM. But the connector alone doesn't decide cloning support — the service number and hardware (catch) code on the case label do, which is why we verify those before you ship.

Full details

See the complete Ford EEC-V PCM Clone / Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Montana today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Billings: about a week.

(817) 678-3252