Auto Module Lab logoAUTO MODULELAB
WISCONSIN · MAIL-IN SERVICE

GM BCM RPO Feature Programming in Wisconsin

Ship your module from Milwaukee or anywhere in Wisconsin — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$450 flat Typical 24-Hour Turnaround ~2-3 day USPS from WI
Text Before You Buy

Why Wisconsin customers mail in gm bcm rpo feature programming

Wisconsin has roughly 5.2 million registered vehicles, and trucks, SUVs & imports make up much of what Milwaukee-area shops and owners mail us. Domestic work like gm bcm rpo feature programming runs high-volume across Wisconsin — we see a steady stream out of Milwaukee, Madison, Green Bay. Cross-region north — about 2-3 days each way.

Metros we serve in Wisconsin

MilwaukeeMadisonGreen BayKenosha

Wisconsin at a glance

  • ~5.2M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Wisconsin requires OBD-II emissions testing in seven southeastern counties near Milwaukee; the rest of the state is exempt.

What you get

  • Every requested BCM feature reconfigured for your VIN in one tune
  • RPO options enabled where your hardware supports them — AU3, A31, UK3, T96, AU0 and more
  • Export/Canadian trucks reverted to US-spec headlamp/DRL behavior
  • Original factory coding preserved for everything you did not change
  • Typical 24-hour turnaround after the BCM is received
  • Return shipping your choice at checkout — standard, 2-day, or overnight
  • 6-month warranty on programming work

Shipping timeline — Wisconsin ↔ Arlington TX

USPS Priority routes north through the Central network; usually 2-3 days. Typical round-trip from Milwaukee or anywhere in Wisconsin:

  1. Day 0

    You ship

    USPS Priority from WI, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Wisconsin FAQ

Common questions from customers shipping from Wisconsin.

How long does shipping take from Wisconsin to your Arlington TX workshop?
USPS Priority Mail from Milwaukee, WI reaches our Arlington workshop in about 2-3 business days. USPS Priority routes north through the Central network; usually 2-3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Wisconsin?
USPS Priority flat-rate from Wisconsin to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Wisconsin is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region north — about 2-3 days each way.
Do you accept gm bcm rpo feature programming modules from Wisconsin?
Yes — we receive modules from Milwaukee, Madison, Green Bay, Kenosha and the rest of Wisconsin regularly. With about 5.2 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Wisconsin.
Is there a gm bcm rpo feature programming shop in Milwaukee I should use instead?
Most Milwaukee shops don't keep the bench equipment for gm bcm rpo feature programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region north — about 2-3 days each way.
Does Wisconsin vehicle inspection or emissions testing affect this service?
Wisconsin requires OBD-II emissions testing in seven southeastern counties near Milwaukee; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Wisconsin and federal requirements.
What about T96 fog lights and AU0 keyless entry on a 2004-2007 Colorado or Canyon?
Both are covered on this page, and the same applies to the Hummer H3 on that BCM family. T96 enables the factory fog-lamp function and AU0 enables remote keyless entry. The fog lamps, switch and harness, or the keyless receiver circuit, must already be in the truck for the enable to do anything.
Can you enable a feature if the parts are not installed?
No, and we will tell you so before you spend money. Programming enables an option the vehicle is already built to run; it cannot create hardware. No BCM tune will make locks cycle without actuators, windows move without motors, fog lamps light without lamps, or a fob work without a receiver. That is why we verify by VIN and RPO sticker up front.

Full details

See the complete GM BCM RPO Feature Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Wisconsin today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Milwaukee: about a week.

(817) 678-3252