Auto Module Lab logoAUTO MODULELAB
WYOMING · MAIL-IN SERVICE

GM BCM RPO Feature Programming in Wyoming

Ship your module from Cheyenne or anywhere in Wyoming — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$450 flat Typical 24-Hour Turnaround ~2-3 day USPS from WY
Text Before You Buy

Why Wyoming customers mail in gm bcm rpo feature programming

Wyoming has roughly 0.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Cheyenne-area shops and owners mail us. Domestic work like gm bcm rpo feature programming runs high-volume across Wyoming — we see a steady stream out of Cheyenne, Casper, Laramie. Cross-region northwest — about 2-3 days each way.

Metros we serve in Wyoming

CheyenneCasperLaramieGillette

Wyoming at a glance

  • ~0.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Wyoming has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Every requested BCM feature reconfigured for your VIN in one tune
  • RPO options enabled where your hardware supports them — AU3, A31, UK3, T96, AU0 and more
  • Export/Canadian trucks reverted to US-spec headlamp/DRL behavior
  • Original factory coding preserved for everything you did not change
  • Typical 24-hour turnaround after the BCM is received
  • Return shipping your choice at checkout — standard, 2-day, or overnight
  • 6-month warranty on programming work

Shipping timeline — Wyoming ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Cheyenne or anywhere in Wyoming:

  1. Day 0

    You ship

    USPS Priority from WY, ~$11

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Wyoming FAQ

Common questions from customers shipping from Wyoming.

How long does shipping take from Wyoming to your Arlington TX workshop?
USPS Priority Mail from Cheyenne, WY reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Wyoming?
USPS Priority flat-rate from Wyoming to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Wyoming is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region northwest — about 2-3 days each way.
Do you accept gm bcm rpo feature programming modules from Wyoming?
Yes — we receive modules from Cheyenne, Casper, Laramie, Gillette and the rest of Wyoming regularly. With about 0.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Wyoming.
Is there a gm bcm rpo feature programming shop in Cheyenne I should use instead?
Most Cheyenne shops don't keep the bench equipment for gm bcm rpo feature programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region northwest — about 2-3 days each way.
Does Wyoming vehicle inspection or emissions testing affect this service?
Wyoming has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Wyoming and federal requirements.
Can you enable a feature if the parts are not installed?
No, and we will tell you so before you spend money. Programming enables an option the vehicle is already built to run; it cannot create hardware. No BCM tune will make locks cycle without actuators, windows move without motors, fog lamps light without lamps, or a fob work without a receiver. That is why we verify by VIN and RPO sticker up front.
Is this the same as your GM BCM clone service?
No — they solve opposite problems. This page ENABLES factory options on a BCM that works. The GM BCM Standalone Clone service COPIES a failed BCM to a matching donor, carrying your VIN, true mileage, theft-deterrent data and existing coding across. If your module is dead you want the clone; if the module is fine but the option is switched off you want this. Send your VIN and symptoms and we will tell you which.

Full details

See the complete GM BCM RPO Feature Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Wyoming today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Cheyenne: about a week.

(817) 678-3252