Auto Module Lab logoAUTO MODULELAB
MISSISSIPPI · MAIL-IN SERVICE

TCM / Transmission Programming in Mississippi

Ship your module from Jackson or anywhere in Mississippi — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from MS
Text Before You Buy

Why Mississippi customers mail in tcm / transmission programming

Mississippi has roughly 2.4 million registered vehicles, and full-size pickups & SUVs make up much of what Jackson-area shops and owners mail us. TCM / Transmission Programming is a bench job most Jackson shops don't keep equipment for, so owners and trade shops across Mississippi ship it to a specialist. Cross-region southeast — about 2 days each way.

Metros we serve in Mississippi

JacksonGulfportSouthavenHattiesburg

Mississippi at a glance

  • ~2.4M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Mississippi has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original TCM data cloned onto the donor, or a used TCM programmed to match your vehicle, where supported
  • Calibration and stored adaptation carried over on a clone, where readable
  • TCM prepared so it communicates and matches after install
  • Bench read + verify before any changes are written
  • Bench communication tested with a stable, regulated power supply
  • Clear instructions on the at-the-car shift-adaptation drive cycle to finish
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Mississippi ↔ Arlington TX

USPS Priority routes southeast through the Gulf network; typically 2 days. Typical round-trip from Jackson or anywhere in Mississippi:

  1. Day 0

    You ship

    USPS Priority from MS, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Mississippi FAQ

Common questions from customers shipping from Mississippi.

How long does shipping take from Mississippi to your Arlington TX workshop?
USPS Priority Mail from Jackson, MS reaches our Arlington workshop in about 2 business days. USPS Priority routes southeast through the Gulf network; typically 2 days. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Mississippi?
USPS Priority flat-rate from Mississippi to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Mississippi is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-region southeast — about 2 days each way.
Do you accept tcm / transmission programming modules from Mississippi?
Yes — we receive modules from Jackson, Gulfport, Southaven, Hattiesburg and the rest of Mississippi regularly. With about 2.4 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Mississippi.
Is there a tcm / transmission programming shop in Jackson I should use instead?
Most Jackson shops don't keep the bench equipment for tcm / transmission programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region southeast — about 2 days each way.
Does Mississippi vehicle inspection or emissions testing affect this service?
Mississippi has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Mississippi and federal requirements.
What's the difference between cloning and programming a used TCM?
Cloning copies your original TCM's exact data onto a donor unit (keeping calibration and adaptation). Programming a used TCM configures a different used unit so it matches and communicates with your vehicle. We recommend the path that fits your parts — tell us which you have.
Does the transmission relearn happen on the bench?
No. The bench work matches and prepares the module so it communicates. The final shift-adaptation / quick-learn happens at the car, because the transmission relearns its shift behavior while driving after install. We include instructions for that drive cycle.

Full details

See the complete TCM / Transmission Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Mississippi today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Jackson: about a week.

(817) 678-3252