Auto Module Lab logoAUTO MODULELAB
NEW YORK · MAIL-IN SERVICE

TCM / Transmission Programming in New York

Ship your module from New York City or anywhere in New York — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from NY
Text Before You Buy

Why New York customers mail in tcm / transmission programming

New York has roughly 10.5 million registered vehicles, and European luxury (BMW, Mercedes, Audi) make up much of what New York City-area shops and owners mail us. TCM / Transmission Programming is a bench job most New York City shops don't keep equipment for, so owners and trade shops across New York ship it to a specialist. Cross-country northeast — about 3 days each way.

Metros we serve in New York

New York CityBuffaloRochesterAlbany

New York at a glance

  • ~10.5M registered vehicles statewide
  • Most common: European luxury (BMW, Mercedes, Audi)
  • New York requires an annual combined safety and emissions inspection statewide.

What you get

  • Your original TCM data cloned onto the donor, or a used TCM programmed to match your vehicle, where supported
  • Calibration and stored adaptation carried over on a clone, where readable
  • TCM prepared so it communicates and matches after install
  • Bench read + verify before any changes are written
  • Bench communication tested with a stable, regulated power supply
  • Clear instructions on the at-the-car shift-adaptation drive cycle to finish
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — New York ↔ Arlington TX

USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. Typical round-trip from New York City or anywhere in New York:

  1. Day 0

    You ship

    USPS Priority from NY, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

New York FAQ

Common questions from customers shipping from New York.

How long does shipping take from New York to your Arlington TX workshop?
USPS Priority Mail from New York City, NY reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from New York?
USPS Priority flat-rate from New York to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to New York is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept tcm / transmission programming modules from New York?
Yes — we receive modules from New York City, Buffalo, Rochester, Albany and the rest of New York regularly. With about 10.5 million registered vehicles statewide, European luxury (BMW, Mercedes, Audi) are the bulk of what we see from New York.
Is there a tcm / transmission programming shop in New York City I should use instead?
Most New York City shops don't keep the bench equipment for tcm / transmission programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does New York vehicle inspection or emissions testing affect this service?
New York requires an annual combined safety and emissions inspection statewide. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all New York and federal requirements.
What's the difference between cloning and programming a used TCM?
Cloning copies your original TCM's exact data onto a donor unit (keeping calibration and adaptation). Programming a used TCM configures a different used unit so it matches and communicates with your vehicle. We recommend the path that fits your parts — tell us which you have.
Does the transmission relearn happen on the bench?
No. The bench work matches and prepares the module so it communicates. The final shift-adaptation / quick-learn happens at the car, because the transmission relearns its shift behavior while driving after install. We include instructions for that drive cycle.

Full details

See the complete TCM / Transmission Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from New York today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from New York City: about a week.

(817) 678-3252