Auto Module Lab logoAUTO MODULELAB
OREGON · MAIL-IN SERVICE

TCM / Transmission Programming in Oregon

Ship your module from Portland or anywhere in Oregon — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from OR
Text Before You Buy

Why Oregon customers mail in tcm / transmission programming

Oregon has roughly 3.4 million registered vehicles, and trucks, SUVs & imports make up much of what Portland-area shops and owners mail us. TCM / Transmission Programming is a bench job most Portland shops don't keep equipment for, so owners and trade shops across Oregon ship it to a specialist. Cross-country northwest — about 3 days each way.

Metros we serve in Oregon

PortlandSalemEugeneGresham

Oregon at a glance

  • ~3.4M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Oregon requires DEQ emissions testing in the Portland and Medford metro areas; the rest of the state is exempt.

What you get

  • Your original TCM data cloned onto the donor, or a used TCM programmed to match your vehicle, where supported
  • Calibration and stored adaptation carried over on a clone, where readable
  • TCM prepared so it communicates and matches after install
  • Bench read + verify before any changes are written
  • Bench communication tested with a stable, regulated power supply
  • Clear instructions on the at-the-car shift-adaptation drive cycle to finish
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Oregon ↔ Arlington TX

USPS Priority routes far northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Portland or anywhere in Oregon:

  1. Day 0

    You ship

    USPS Priority from OR, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Oregon FAQ

Common questions from customers shipping from Oregon.

How long does shipping take from Oregon to your Arlington TX workshop?
USPS Priority Mail from Portland, OR reaches our Arlington workshop in about 3 business days. USPS Priority routes far northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Oregon?
USPS Priority flat-rate from Oregon to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Oregon is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept tcm / transmission programming modules from Oregon?
Yes — we receive modules from Portland, Salem, Eugene, Gresham and the rest of Oregon regularly. With about 3.4 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Oregon.
Is there a tcm / transmission programming shop in Portland I should use instead?
Most Portland shops don't keep the bench equipment for tcm / transmission programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Oregon vehicle inspection or emissions testing affect this service?
Oregon requires DEQ emissions testing in the Portland and Medford metro areas; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Oregon and federal requirements.
What's the difference between cloning and programming a used TCM?
Cloning copies your original TCM's exact data onto a donor unit (keeping calibration and adaptation). Programming a used TCM configures a different used unit so it matches and communicates with your vehicle. We recommend the path that fits your parts — tell us which you have.
Does the transmission relearn happen on the bench?
No. The bench work matches and prepares the module so it communicates. The final shift-adaptation / quick-learn happens at the car, because the transmission relearns its shift behavior while driving after install. We include instructions for that drive cycle.

Full details

See the complete TCM / Transmission Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Oregon today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Portland: about a week.

(817) 678-3252