TIPM RepairChrysler Dodge Jeep RamRepair CostMail-In Service

TIPM Repair Cost — Mail-In Bench Programming (2026)

Auto Module Lab Technical Team·ALOA-MAL Certified · 15+ Years ECU + Key ProgrammingNovember 9, 2026·11 min read

The short answer: what a TIPM repair costs by mail

As of November 2026, bench repair of a Chrysler, Dodge, Jeep or Ram TIPM is $499 flat on our TIPM repair service. You ship us the module on a prepaid inbound label, we repair the failing relay, voltage regulator or body-control-side circuit, bench-test it, and send it back. Return shipping is paid by you and chosen at checkout, starting from $29.95 for standard. That puts the typical all-in total at $528.95, against a dealer replacement our service page lists at $1,200 to $1,800.

Three things can change that number: the return-shipping tier you choose, whether the unit turns out to be beyond bench repair, and whether a factory recall already covers your exact vehicle. The rest of this guide is those three variables in detail, plus how to decide between repair, a used unit and a new one.

Pricing note: every dollar figure for our services below is read from our own service catalog, not estimated. Dealer and used-part ranges are the ones stated on the service page or described as typical, and they vary by region and by VIN.

What a TIPM actually is, and why it is a price-sensitive part

The Totally Integrated Power Module is the under-hood fuse box and relay center that Chrysler, Dodge, Jeep and Ram fused together with a body-control computer. Instead of a passive box of fuses and relays, it carries the fuel pump relay, starter and ignition feeds, wiper, horn and lock circuits, headlight and interior-light drivers, and communication with the rest of the vehicle network. Our service page covers roughly 2007 to 2014 vehicles with this architecture: Chrysler Town and Country, 300, Sebring and 200; Dodge Grand Caravan, Charger, Challenger, Durango, Dakota and Journey; Jeep Wrangler JK, Grand Cherokee WK2, Liberty, Patriot and Compass; and Ram 1500, 2500 and 3500 from the 2009 model years.

That integration is exactly why the part is expensive from a dealer and why it fails in confusing ways. A single failing internal relay can produce a random no-start, a fuel pump that keeps running after the key is out, stalling at speed, or wipers and horn behaving on their own. You will see the symptom list laid out in our TIPM failure symptoms guide. Cost questions come after the symptom question, so if you are still deciding whether the TIPM is your problem, start there and come back.

The fleet context matters for price too. S&P Global Mobility reports the average US light vehicle reached 12.8 years old in 2025, with passenger cars averaging 14.5 years. A 2007 to 2014 vehicle is squarely inside that average-age band, which means many of these vehicles are worth less than a dealer TIPM replacement plus labor. For an owner of a 2010 Jeep or a 2012 Ram, the repair-versus-replace math is often about whether the vehicle is worth keeping, not only about the part.

The price table: every route, one view

The table below puts the realistic routes side by side. Our rows come from the service catalog. The dealer row uses the range stated on that same service page, and the recall row reflects what the manufacturer notice says about the covered vehicles.

Route What you pay What you get Main catch
Mail-in bench repair (standard return) $499 + $29.95 = $528.95 Original TIPM repaired, VIN, coding and security data preserved 3 to 5 transit days on return, plus bench time
Mail-in bench repair (2-day return) $499 + $54.95 = $553.95 Same repair, faster return Pay more for the speed
Mail-in bench repair (overnight return) $499 + $94.95 = $593.95 Same repair, fastest return Highest shipping tier
Unit not repairable (water or burned tracks) $150 bench evaluation fee, the rest of the repair charge refunded minus shipping A clear diagnosis You still need another module
Dealer new TIPM $1,200 to $1,800 per our service page, before labor New OEM part Highest price, and programming is separate
Factory recall repair (covered VINs only) Free for covered vehicles Manufacturer remedy Applies only to specific model years and VINs

The return tiers come straight from our shipping table: standard is $29.95 for about 3 to 5 days, UPS 2-Day is $54.95 and UPS overnight is $94.95. Exactly one tier is charged per order. We buy and email the inbound label, so the trip to us does not add to your bill.

What changes the price: the variables that actually matter

Most people expect a repair quote to wander with the amount of work. A flat-price bench service works differently: the repair line stays at $499, and the variables sit around it.

1. The return-shipping tier. This is the single biggest swing for a normal job, from $29.95 to $94.95, a $65 spread. If the vehicle is parked and you are not in a hurry, standard is the rational choice. If it is your only transport, the faster tiers often pay for themselves in avoided rental days.

2. Repairable or not. The great majority of failed TIPMs are electrically repairable because the failures cluster in a small set of components: the fuel pump relay, other relay contacts, a voltage regulator, and body-control-side circuits. Our service page states that severe water damage or burned board tracks can exceed bench repair, and that roughly 5 percent of units received fall in this category. When that happens, the repair is not performed and you pay a $150 bench evaluation fee while the rest is refunded, minus shipping. That is the cost of finding out your unit is dead, and it is the reason we ask for a photo and a symptom line before you ship.

3. Recall coverage. For specific vehicles, the manufacturer already pays. NHTSA investigation DP14-004, summarized on that page, describes a fuel pump relay defect inside the TIPM-7: approximately 188,723 model year 2011 Jeep Grand Cherokee and Dodge Durango vehicles in the first recall (14V-530), then 338,216 more 2012 to 2013 vehicles in the second (15V-115). The recall notice itself, hosted on NHTSA's recall document server, says the TIPM contains an internal fuel pump relay that could operate intermittently or fail without warning and cause the engine to stall. If your vehicle is inside a recall, run the VIN at nhtsa.gov first. A free dealer remedy beats any paid route. Outside those model years and VINs, which includes Wranglers, Rams, minivans and the 300 and Charger, there is no equivalent coverage and the realistic choice is repair, used or new.

4. How many symptoms you are chasing. A bench repair fixes what is wrong inside the module. It does not fix a bad ground, a corroded harness connector, a dead battery or a failed mechanical pump. If you replace the TIPM or repair it and the real fault was upstream, you have spent the money and still have the symptom. Our bench evaluation is the correct tool when the cause is unclear, and is separate from the flat repair price.

5. Programming after a swap. This is the hidden line in dealer and used-part quotes. A replacement TIPM is not plug and play on these vehicles; it carries VIN and body-control data. Our repair returns your original unit, and our service page states that the repair preserves the TIPM's VIN, body-control coding and security data, so you reinstall it and start the vehicle. No programming is needed after a repair because nothing was replaced. When a quote for a replacement does not say who programs it, ask. Our TIPM replacement programming guide explains what the data transfer involves.

Repair, used or new: how the three routes really compare

Bench repair. You keep your own module, so you keep your own VIN data. The cost is predictable, the turnaround after receipt is typically about 24 hours, and the failure points are replaced with higher-rated parts than the originals according to our service description. The downsides are time without the vehicle while it ships both ways, and the need to pull the module yourself or have a shop do it.

A used TIPM. The sticker price can look attractive, but it ships with someone else's history and someone else's data. It generally has to be matched to your vehicle, and a used unit from the same failure-prone generation can fail in the same way later. We write about this trade in used versus new TIPM programming. Buyers of used units also carry the risk of a counterfeit or previously water-damaged part, which no table can price.

A new dealer TIPM. This is the only route that gives you a fresh part and the manufacturer's remedy path, and it is the one our service page prices at $1,200 to $1,800 before labor and programming. If your vehicle has strong value and you want the cleanest answer, that cost can be rational. For a 12 or 14 year old vehicle it often is not.

The decision usually reduces to a simple rule. If the vehicle is worth more than about $4,000 and the symptoms are classic TIPM behavior, repair first, since $528.95 is a small fraction of replacement. If the symptoms are vague, spend on diagnosis before spending on any module.

A worked example, step by step

Take a 2012 Ram 1500 with a fuel pump that runs after the key is off and a no-start that clears itself after an hour. There are no stored codes. The owner has checked the battery and the starter.

  • Day 0. Text us the symptoms and the VIN. We confirm the symptom pattern fits a TIPM and tell the owner which part number to look for on the label.
  • Day 0 to 1. The owner, or a local shop, removes the TIPM from the driver-side area under the hood, and orders the repair. The checkout offers return tiers. They choose standard: $499 plus $29.95.
  • Day 1 to 4. The module travels to us on the prepaid inbound label.
  • Day 4 to 5. Bench diagnosis finds a failed fuel pump relay. It is replaced, the other relays and the regulator are tested and the unit is bench-run.
  • Day 5 to 10. The module ships back by standard return. The owner reinstalls it and starts the truck.
  • Total. $528.95, against a dealer figure in the $1,200 to $1,800 range.

If the same unit had arrived with corroded tracks from a coolant or water leak, the outcome would be the $150 bench evaluation fee and a clear explanation. That is the real downside risk of the mail-in route, and it is capped.

How to remove and ship a TIPM safely

The shipping process is where most avoidable cost hides, because a module damaged in transit is a module nobody can price.

  1. Disconnect the battery before removing anything and wait a few minutes.
  2. Photograph every connector and the module position before pulling it. Photographs prevent reinstall mistakes.
  3. Remove the module without prying on the board. Do not open the cover.
  4. Place it in an anti-static bag, then in a box with at least two inches of padding on every side.
  5. Include the printed order confirmation, the VIN, and one sentence describing the most consistent symptom.
  6. Use the prepaid inbound label we email you. Do not insure it for a different value than the repair price; the label is for transit protection, not a valuation.

For the vehicle-specific location and removal notes, our service page lists the module as normally under the hood on the driver side. Proof of ownership is required for any key, immobilizer or security-related work, and the TIPM touches security data, so have registration or title information ready.

Common mistakes that inflate the bill

  • Replacing the fuel pump first. The pump is the obvious suspect, but a TIPM-side relay failure produces the same no-start. Test the pump feed before buying hardware.
  • Buying a used TIPM on price alone. The saved few hundred dollars can disappear into programming or a repeat failure.
  • Skipping the recall check. A free remedy is worth a two-minute VIN lookup.
  • Shipping an unlabelled module. Without a VIN and symptom note, intake slows down.
  • Clearing codes and assuming it is fixed. An intermittent TIPM fault can hide for days. Record when the symptom appears; our guide on what a bench evaluation finds when scan tools cannot shows what information helps.

"The expensive TIPM jobs I see are rarely the repairs. They are the ones where somebody bought a new module for a truck that only needed a relay, then found out the original fault was a bad ground, and paid twice." — Independent Chrysler-family driveability technician, 15+ years on body-control and power-distribution faults (anonymized)

When replacement is the right call

A repair is not always the answer. Consider replacement when the unit has visible water damage with green or white corrosion across the board, when burned tracks or melted relay housings are present, when the module has been opened and re-soldered by someone else, or when the vehicle is covered by a recall remedy you can get for free. In each of those cases the repair either cannot be done or does not make economic sense. Our evaluation fee exists so that you learn that before spending on a swap.

For related repair pricing across other modules, our cross-module repair price menu shows where a TIPM sits against ABS, cluster and BCM work, and our Chrysler, Dodge and Jeep module programming cost guide covers the PCM and TIPM-adjacent lines.

Sources and further reading

For recall lookups and safety data, use NHTSA. For general repair-cost context on the vehicles this applies to, Kelley Blue Book and Car and Driver publish valuation and ownership material that helps with the repair-versus-keep decision. For vehicle-theft context relevant to immobilizer-linked modules, NICB data reported by Insurance Journal puts 2025 US vehicle thefts at 659,880, a 23 percent decrease from the prior year, which is one reason security data is preserved rather than reset on these repairs. Industry standards for vehicle networks and electronics are maintained by SAE International.

Frequently asked questions

How much does a TIPM repair cost by mail-in service?

A mail-in TIPM repair costs $499 flat as of November 2026, plus a return-shipping tier chosen at checkout, starting from $29.95. A standard-shipping job therefore totals $528.95, compared with a dealer new-module figure of $1,200 to $1,800 stated on our service page.

Is a TIPM repair cheaper than a dealer replacement?

Yes, by a wide margin for most vehicles. The flat repair plus standard return is $528.95, while a dealer new TIPM is listed at $1,200 to $1,800 before labor and programming. The exception is a recall-covered vehicle, where the manufacturer remedy is free for the specific VINs included.

Does my vehicle need programming after a TIPM repair?

No. The repair returns your original module, and our service page states it preserves the TIPM's VIN, body-control coding and security data. You reinstall it and start the vehicle. Programming becomes a separate cost only when you replace the module with a used or new one.

What if my TIPM cannot be repaired?

If severe water damage or burned board tracks put the unit beyond bench repair, you pay a $150 bench evaluation fee and the rest of the repair charge is refunded, minus shipping. Our service page puts that outcome at roughly 5 percent of units received, which is why we ask for symptoms and photos before you ship.

How long does a TIPM repair take?

Bench work typically takes about 24 hours after the module arrives. Total time is mostly transit: the prepaid inbound trip plus the return tier you choose, which runs about 3 to 5 days on standard and shorter on the 2-day and overnight tiers.

Which vehicles are covered by the TIPM repair service?

The service covers roughly 2007 to 2014 Chrysler, Dodge, Jeep and Ram vehicles with a TIPM, including the Wrangler JK, Grand Cherokee WK2, Ram 1500, 2500 and 3500 from 2009, Durango, Charger, Challenger, Grand Caravan and Journey. If you are unsure, text us the VIN and the label part number before you ship.

Do I pay for return shipping separately?

Yes. Return shipping is paid by the customer and chosen at checkout, starting from $29.95 for standard, $54.95 for UPS 2-Day and $94.95 for UPS overnight. We buy and email the inbound label for the trip to us, so only the return leg appears on your bill.

The bottom line

A TIPM repair by mail is a $499 flat service plus a return tier that starts at $29.95, so most owners finish at $528.95 against a dealer figure of $1,200 to $1,800. The three things that move your total are the return speed you pick, whether the unit is repairable at all, and whether a recall already covers your vehicle. Check the VIN against recalls first, confirm the symptoms point to the module rather than a ground or the pump, and use a bench evaluation when the cause is unclear. When the pattern fits, shipping your own module back to health is the lowest-cost route that keeps your original data intact. Start from the TIPM repair service page and text us the VIN and symptoms before you pull anything.

Ship it for the tipm chrysler/dodge/jeep repair — $499 flat

Typical 24-Hour Turnaround, return speed your choice at checkout. Prepaid inbound label by email the minute you order.

More from the Lab