Auto Module Lab logoAUTO MODULELAB
ALABAMA · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Alabama

Ship your module from Birmingham or anywhere in Alabama — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from AL
Text Before You Buy

Why Alabama customers mail in ford dps6 powershift tcm clone

Alabama has roughly 5.3 million registered vehicles, and full-size pickups & SUVs make up much of what Birmingham-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Alabama — we see a steady stream out of Birmingham, Huntsville, Mobile. Cross-region — roughly 2 days each way for a quick round-trip.

Metros we serve in Alabama

BirminghamHuntsvilleMobileMontgomery

Alabama at a glance

  • ~5.3M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Alabama has no mandatory statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Alabama ↔ Arlington TX

USPS Priority routes east through the Atlanta network; typically 2 days from most of the state. Typical round-trip from Birmingham or anywhere in Alabama:

  1. Day 0

    You ship

    USPS Priority from AL, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Alabama FAQ

Common questions from customers shipping from Alabama.

How long does shipping take from Alabama to your Arlington TX workshop?
USPS Priority Mail from Birmingham, AL reaches our Arlington workshop in about 2 business days. USPS Priority routes east through the Atlanta network; typically 2 days from most of the state. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Alabama?
USPS Priority flat-rate from Alabama to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Alabama is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region — roughly 2 days each way for a quick round-trip.
Do you accept ford dps6 powershift tcm clone modules from Alabama?
Yes — we receive modules from Birmingham, Huntsville, Mobile, Montgomery and the rest of Alabama regularly. With about 5.3 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Alabama.
Is there a ford dps6 powershift tcm clone shop in Birmingham I should use instead?
Most Birmingham shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region — roughly 2 days each way for a quick round-trip.
Does Alabama vehicle inspection or emissions testing affect this service?
Alabama has no mandatory statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Alabama and federal requirements.
My car shudders and the dealer blames the clutch — will cloning fix that?
No, and we'll be straight with you about it. Shudder and rough engagement on a DPS6 almost always come from worn dry clutches or shift-fork actuators, which are mechanical parts — a control-module clone does not repair them. Cloning solves the electronic side: a dead TCM, a used TCM carrying the wrong identity, or a module-fault warning. Describe your exact symptoms when you contact us and we'll help you tell a module problem from a clutch problem before you spend anything.
Will the cloned module be plug-and-play?
On supported applications, yes — the donor carries your original's VIN, calibration, and clutch adaptation, so it installs without a dealer programming trip. Two honest caveats: the donor TCM must match your Ford part number, and after install the transmission runs a clutch relearn / adaptation so it can re-learn the clutch touch points. That relearn is normal after any TCM or clutch service and completes over a short drive.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Alabama today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Birmingham: about a week.

(817) 678-3252