Auto Module Lab logoAUTO MODULELAB
CONNECTICUT · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Connecticut

Ship your module from Hartford or anywhere in Connecticut — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from CT
Text Before You Buy

Why Connecticut customers mail in ford dps6 powershift tcm clone

Connecticut has roughly 2.9 million registered vehicles, and European luxury (BMW, Mercedes, Audi) make up much of what Hartford-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Connecticut — we see a steady stream out of Hartford, Bridgeport, New Haven. Cross-country northeast — about 3 days each way.

Metros we serve in Connecticut

HartfordBridgeportNew HavenStamford

Connecticut at a glance

  • ~2.9M registered vehicles statewide
  • Most common: European luxury (BMW, Mercedes, Audi)
  • Connecticut requires a biennial OBD-II emissions inspection for most vehicles statewide.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Connecticut ↔ Arlington TX

USPS Priority routes northeast through the regional network; typically 3 days to the Northeast. Typical round-trip from Hartford or anywhere in Connecticut:

  1. Day 0

    You ship

    USPS Priority from CT, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Connecticut FAQ

Common questions from customers shipping from Connecticut.

How long does shipping take from Connecticut to your Arlington TX workshop?
USPS Priority Mail from Hartford, CT reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the regional network; typically 3 days to the Northeast. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Connecticut?
USPS Priority flat-rate from Connecticut to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Connecticut is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept ford dps6 powershift tcm clone modules from Connecticut?
Yes — we receive modules from Hartford, Bridgeport, New Haven, Stamford and the rest of Connecticut regularly. With about 2.9 million registered vehicles statewide, European luxury (BMW, Mercedes, Audi) are the bulk of what we see from Connecticut.
Is there a ford dps6 powershift tcm clone shop in Hartford I should use instead?
Most Hartford shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does Connecticut vehicle inspection or emissions testing affect this service?
Connecticut requires a biennial OBD-II emissions inspection for most vehicles statewide. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Connecticut and federal requirements.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both TCM part-number labels, you ship the units to Auto Module Lab in Arlington, TX. We clone or program the data on the bench, test communication, and ship both back with tracking — return speed your choice at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95). Inbound shipping to the lab is customer-paid with your choice of carrier.
What is a DPS6 and which cars have it?
The DPS6 is Ford's 6-speed PowerShift dry dual-clutch automated transmission — it drives like an automatic but uses two clutches instead of a torque converter. Ford fitted it to the 2011-2018 Focus and 2011-2019 Fiesta in North America. Its TCM (transmission control module, sometimes called the TCU) commands the clutches and shift-fork actuators. Send your VIN and a photo of the TCM label and we confirm your exact application before you ship.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Connecticut today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Hartford: about a week.

(817) 678-3252