Auto Module Lab logoAUTO MODULELAB
COLORADO · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Colorado

Ship your module from Denver or anywhere in Colorado — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from CO
Text Before You Buy

Why Colorado customers mail in ford dps6 powershift tcm clone

Colorado has roughly 5.3 million registered vehicles, and trucks & 4x4 SUVs make up much of what Denver-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Colorado — we see a steady stream out of Denver, Colorado Springs, Aurora. Regional west — about 2 days each way.

Metros we serve in Colorado

DenverColorado SpringsAuroraFort Collins

Colorado at a glance

  • ~5.3M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Colorado requires emissions testing in the Denver-Boulder Front Range metro region; rural counties are exempt.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Colorado ↔ Arlington TX

USPS Priority runs northwest from the North Texas network; roughly 2 days. Typical round-trip from Denver or anywhere in Colorado:

  1. Day 0

    You ship

    USPS Priority from CO, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Colorado FAQ

Common questions from customers shipping from Colorado.

How long does shipping take from Colorado to your Arlington TX workshop?
USPS Priority Mail from Denver, CO reaches our Arlington workshop in about 2 business days. USPS Priority runs northwest from the North Texas network; roughly 2 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Colorado?
USPS Priority flat-rate from Colorado to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Colorado is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Regional west — about 2 days each way.
Do you accept ford dps6 powershift tcm clone modules from Colorado?
Yes — we receive modules from Denver, Colorado Springs, Aurora, Fort Collins and the rest of Colorado regularly. With about 5.3 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Colorado.
Is there a ford dps6 powershift tcm clone shop in Denver I should use instead?
Most Denver shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Regional west — about 2 days each way.
Does Colorado vehicle inspection or emissions testing affect this service?
Colorado requires emissions testing in the Denver-Boulder Front Range metro region; rural counties are exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Colorado and federal requirements.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both TCM part-number labels, you ship the units to Auto Module Lab in Arlington, TX. We clone or program the data on the bench, test communication, and ship both back with tracking — return speed your choice at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95). Inbound shipping to the lab is customer-paid with your choice of carrier.
What is a DPS6 and which cars have it?
The DPS6 is Ford's 6-speed PowerShift dry dual-clutch automated transmission — it drives like an automatic but uses two clutches instead of a torque converter. Ford fitted it to the 2011-2018 Focus and 2011-2019 Fiesta in North America. Its TCM (transmission control module, sometimes called the TCU) commands the clutches and shift-fork actuators. Send your VIN and a photo of the TCM label and we confirm your exact application before you ship.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Colorado today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Denver: about a week.

(817) 678-3252