Auto Module Lab logoAUTO MODULELAB
KENTUCKY · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Kentucky

Ship your module from Louisville or anywhere in Kentucky — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from KY
Text Before You Buy

Why Kentucky customers mail in ford dps6 powershift tcm clone

Kentucky has roughly 4.2 million registered vehicles, and trucks, SUVs & imports make up much of what Louisville-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Kentucky — we see a steady stream out of Louisville, Lexington, Bowling Green. Cross-region northeast — about 2 days each way.

Metros we serve in Kentucky

LouisvilleLexingtonBowling GreenOwensboro

Kentucky at a glance

  • ~4.2M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Kentucky has no statewide periodic vehicle safety or emissions inspection program for most passenger vehicles.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Kentucky ↔ Arlington TX

USPS Priority routes northeast through the Central network; typically 2 days. Typical round-trip from Louisville or anywhere in Kentucky:

  1. Day 0

    You ship

    USPS Priority from KY, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Kentucky FAQ

Common questions from customers shipping from Kentucky.

How long does shipping take from Kentucky to your Arlington TX workshop?
USPS Priority Mail from Louisville, KY reaches our Arlington workshop in about 2 business days. USPS Priority routes northeast through the Central network; typically 2 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Kentucky?
USPS Priority flat-rate from Kentucky to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Kentucky is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region northeast — about 2 days each way.
Do you accept ford dps6 powershift tcm clone modules from Kentucky?
Yes — we receive modules from Louisville, Lexington, Bowling Green, Owensboro and the rest of Kentucky regularly. With about 4.2 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Kentucky.
Is there a ford dps6 powershift tcm clone shop in Louisville I should use instead?
Most Louisville shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region northeast — about 2 days each way.
Does Kentucky vehicle inspection or emissions testing affect this service?
Kentucky has no statewide periodic vehicle safety or emissions inspection program for most passenger vehicles. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Kentucky and federal requirements.
Will the cloned module be plug-and-play?
On supported applications, yes — the donor carries your original's VIN, calibration, and clutch adaptation, so it installs without a dealer programming trip. Two honest caveats: the donor TCM must match your Ford part number, and after install the transmission runs a clutch relearn / adaptation so it can re-learn the clutch touch points. That relearn is normal after any TCM or clutch service and completes over a short drive.
My original TCM is completely dead — can you still program a donor?
Yes — that becomes used-TCM programming: we bench-write the correct factory calibration for your VIN onto the donor, and the clutch relearn / adaptation is finished at the car. You lose nothing except the original's stored clutch adaptation, which the transmission re-learns on its own during the drive-cycle relearn after install.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasLouisianaMaineMarylandMassachusetts

Ship from Kentucky today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Louisville: about a week.

(817) 678-3252