Auto Module Lab logoAUTO MODULELAB
ARIZONA · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Arizona

Ship your module from Phoenix or anywhere in Arizona — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from AZ
Text Before You Buy

Why Arizona customers mail in ford dps6 powershift tcm clone

Arizona has roughly 5.8 million registered vehicles, and trucks, SUVs & imports make up much of what Phoenix-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Arizona — we see a steady stream out of Phoenix, Tucson, Mesa. Cross-country southwest — about 2 days each way.

Metros we serve in Arizona

PhoenixTucsonMesaScottsdale

Arizona at a glance

  • ~5.8M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Arizona requires emissions testing in the Phoenix and Tucson metro areas; the rest of the state is exempt.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Arizona ↔ Arlington TX

USPS Priority runs west through the Southwest network; about 2 days from Arlington. Typical round-trip from Phoenix or anywhere in Arizona:

  1. Day 0

    You ship

    USPS Priority from AZ, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Arizona FAQ

Common questions from customers shipping from Arizona.

How long does shipping take from Arizona to your Arlington TX workshop?
USPS Priority Mail from Phoenix, AZ reaches our Arlington workshop in about 2 business days. USPS Priority runs west through the Southwest network; about 2 days from Arlington. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Arizona?
USPS Priority flat-rate from Arizona to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Arizona is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country southwest — about 2 days each way.
Do you accept ford dps6 powershift tcm clone modules from Arizona?
Yes — we receive modules from Phoenix, Tucson, Mesa, Scottsdale and the rest of Arizona regularly. With about 5.8 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Arizona.
Is there a ford dps6 powershift tcm clone shop in Phoenix I should use instead?
Most Phoenix shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country southwest — about 2 days each way.
Does Arizona vehicle inspection or emissions testing affect this service?
Arizona requires emissions testing in the Phoenix and Tucson metro areas; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Arizona and federal requirements.
Will the cloned module be plug-and-play?
On supported applications, yes — the donor carries your original's VIN, calibration, and clutch adaptation, so it installs without a dealer programming trip. Two honest caveats: the donor TCM must match your Ford part number, and after install the transmission runs a clutch relearn / adaptation so it can re-learn the clutch touch points. That relearn is normal after any TCM or clutch service and completes over a short drive.
My original TCM is completely dead — can you still program a donor?
Yes — that becomes used-TCM programming: we bench-write the correct factory calibration for your VIN onto the donor, and the clutch relearn / adaptation is finished at the car. You lose nothing except the original's stored clutch adaptation, which the transmission re-learns on its own during the drive-cycle relearn after install.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Arizona today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Phoenix: about a week.

(817) 678-3252