Auto Module Lab logoAUTO MODULELAB
IOWA · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Iowa

Ship your module from Des Moines or anywhere in Iowa — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2 day USPS from IA
Text Before You Buy

Why Iowa customers mail in ford dps6 powershift tcm clone

Iowa has roughly 3.4 million registered vehicles, and full-size pickups & SUVs make up much of what Des Moines-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Iowa — we see a steady stream out of Des Moines, Cedar Rapids, Davenport. Cross-region north — about 2 days each way.

Metros we serve in Iowa

Des MoinesCedar RapidsDavenportSioux City

Iowa at a glance

  • ~3.4M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Iowa has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Iowa ↔ Arlington TX

USPS Priority routes north through the Central network; typically 2 days. Typical round-trip from Des Moines or anywhere in Iowa:

  1. Day 0

    You ship

    USPS Priority from IA, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Iowa FAQ

Common questions from customers shipping from Iowa.

How long does shipping take from Iowa to your Arlington TX workshop?
USPS Priority Mail from Des Moines, IA reaches our Arlington workshop in about 2 business days. USPS Priority routes north through the Central network; typically 2 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Iowa?
USPS Priority flat-rate from Iowa to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Iowa is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region north — about 2 days each way.
Do you accept ford dps6 powershift tcm clone modules from Iowa?
Yes — we receive modules from Des Moines, Cedar Rapids, Davenport, Sioux City and the rest of Iowa regularly. With about 3.4 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Iowa.
Is there a ford dps6 powershift tcm clone shop in Des Moines I should use instead?
Most Des Moines shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region north — about 2 days each way.
Does Iowa vehicle inspection or emissions testing affect this service?
Iowa has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Iowa and federal requirements.
Does this cover other Ford dual-clutch transmissions?
This listing is specifically for the 6-speed DPS6 PowerShift in the Focus and Fiesta. Other Ford dual-clutch and automated units use different modules and procedures. Send us your VIN and TCM label photo anyway — we handle other Ford transmission controllers case-by-case and will point you to the right service or a quote.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both TCM part-number labels, you ship the units to Auto Module Lab in Arlington, TX. We clone or program the data on the bench, test communication, and ship both back with tracking — return speed your choice at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95). Inbound shipping to the lab is customer-paid with your choice of carrier.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Iowa today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Des Moines: about a week.

(817) 678-3252